Alteryx Server Ideas

Hello,

We would like to have the option to configure the timeout of the manual running jobs, as already exists for the schedule jobs.

Regards

It would be very useful to have a standardized method to set up notifications to the server admins and to the job owner themselves if an alteryx canvas fails (error).

My understanding is that currently the only way to do notifications on failure for every canvas is for every canvas to individually set up events.   On a large implementation, this becomes very difficult to manage.

Idea: Option to receive an email notification when a schedule gets disabled (could be added in the user settings, see attached picture)

Business Impact: The implementation of this idea would reduce delays that might even have a financial impact because

not receiving any notifications when a schedule was disabled could lead to

• important processes not being executed and users realizing that only at a later point in time (>> potential financial impact and stress)
• the user not being able deliver a report in time (>> potential financial impact)
• huge effort to manually track the workflow results on the server (or email notifications after a successfull run) to avoid the above two bullet points (>> financial impact due to waste of time)

I would be glad if you could implement this idea because I think it would be useful for a lot of people!

We have several clients that operate in a Multi-Forest environment due to mergers and acquisitions.  Currently with Alteryx Server the only option we can offer them is to use Built-In authentication.  A lot of corporate and particularly finance institutions prefer a single sign on approach and utilise Windows authentication to do this.

Would it be possible to add support for Multi-Forest organisations into Server to support organisations going through mergers and acquisitions?

This would really benefit us in selling Server in to organisations with complex structures and reduce friction in publishing or preparing workflows.

I would like to be able to view all schedule results from all users in my Gallery.  Currently, I can see the "Workflow Results" for any schedules I create.  But I cannot see them for users unless they share them.  As admin, I want an option on the Gallery Admin screen just like there is on the Gallery user screen to see "Workflow Results" for every schedule that is in the Scheduler Database, regardless of who the user shared it with.

Currently, the only way to accomplish this is to go to Designer, View Schedules, connect to the Controller, and go to the Results tab.  This should be built into the Admin screen in the Gallery.

See following article for background reference: https://community.alteryx.com/t5/Alteryx-Server-Discussions/workflow-exceeded-maximum-runtime-of-30-...

I have a support case (#00278355) advising unsupported changes to the alteryx.config file, involving an undocumented setting for chainedTimeout, as in:

<engine enableAutoLicensing="true" useServiceLayerComposer="true" chainedTimeout="10800"

This setting should be documented, supported, and made user-configurable through the System Settings GUI. 

I work at a large organization where Security and Privacy are of utmost importance. The ideology that we need to follow is Least Privilege and Need to Know.

We (Curators) do not want all the Artisans to publish workflows to Home Page, either knowingly or unknowingly. We however do want to allow a few power users to publish their work in Home Page, but currently the Gallery does not provide the ability to pick and choose who can share workflows publicly. We are educating users to not share any contents publicly, but as we scale up, it will be difficult to manage and govern this.

I'm suggesting to implement a global Yes/No feature that will Enable/Disable Artisans to publish contents in Home Page (just like the way we have for Jobs/Scheduling feature). Further, in Users section, Edit User setting needs to have a Yes/No button that will allow Curators to let certain Artisans place workflows in My Company's Gallery.

Organizations that never want any workflow to be shared publicly can disable this feature using global Yes/No button. Organizations (like the one I work at) that want to enable this only for certain Artisans, can set the Global Yes/No to No, and then in Users tab, they can pick and choose the Users that need this functionality (which will override the global default). Finally Organizations that do not really care about this functionality can just set the global setting to Yes.

Hoping other organizations find value in this functionality as well. Thanks.

currently, there isn't any way to fully delete (safely) a user from the gallery. So if there is a previous client or previous employee in gallery, we cannot clean up the gallery settings - only "disable". It would be great to have a "trash can" symbol next to the users where we can remove them from the server and keep all of the users clean. 

If a job fails it would be perfect if we could set something in the workflow settings so that the job would retry again in X number of minutes for the next Y number of times. We have jobs that connect to external resources and sometimes the network will reset and will cause the connections to all drop. An example would be I want a workflow to try again in 10 minutes for a maximum of 5 times so over the next 50 mins it will retry every 10 mins if it fails

One of our Server customers has a need to disable all schedules temporarily across all worker nodes.  I do not see an easy way to do this unless we go into each worker's settings and disable from there, but this is not ideal.

The reason is for scheduled maintenance windows during a large upgrade or migration.  Currently stopping the Alteryx Service on each worker is time consuming.

Thank you! 

Currently the e-mail settings for the server are set up using a wizard and are not available within the admin UI.

Please could you add an explicit section to the Admin UI to allow the admin team to set up approved SMTP settings, allowing this all to be managed in one admin console.

Further: Can you allow the admins to push these settings down to the desktop users.   This would allow the admin team to control the SMTP usage and prevent data leakage.   It would also reduce complexity for the user since the SMTP settings are all pre-set making eMail tools; and Events easier to set up.

Currently the server diagnostics (http://localhost/gallery/admin/#!diagnostics) covers a narrow time window (from what I can see - only the last few hours)

.... and if you attempt to zoom out or pan to see a broader time window - the graph gets smaller, but the data does not grow to fill the remaining space

Please could we request 2 changes:

a) add a time axis on the bottom of this chart so that the user can understand the time dimension 

b) Increase the time available for analytics to an arbitrarily broad set of data (which the admin can configure as a server setup parameter - retention period).   For us - we'd want to keep at least 3 months of data, and be able to view this analytically.

Thank you 

Sean

I would suggest a service split to simplify maintenance actions in the Alteryx Server.

Split Alteryx Service into 5 services:

 Alteryx controller

• Dependencies: Alteryx Database
• Purpose: Controls job submissions
• Meaning: The Alteryx controller Service stopped means neither the users or the scheduler can submit new jobs

Alteryx Database

• Dependencies: N/A
• Purpose: Database
• Meaning: The Alteryx Database Service stopped means all the platform is down

Alteryx Gallery

• Dependencies: Alteryx Database
• Purpose: Controls the Web UI
• Meaning: Alteryx Gallery Service stopped means the gallery web page is down

Alteryx Scheduler

• Dependencies: Alteryx controller, Alteryx Database
• Purpose: Controls the scheduled jobs
• Meaning: The Alteryx Scheduler Service stopped means the users can still submit jobs manually but scheduled jobs wont be submited

Alteryx Worker

• Dependencies: Alteryx controller, Alteryx Database (only applicable if the server where the Alteryx Worker Service is running the Alteryx controller)
• Purpose: Executes the jobs
• Meaning: The Alteryx Worker Service stopped means no job will be executed on the node

This service split will help perform some maintenance tasks and enables the Platform Administrators to shutdown the platform correctly shutting down the services in the correct order.

Usage Example 1 (Cold Backup):

• Stop the controller so no more jobs can be submitted
• Stop all the workers
• After all the workers have stopped the Alteryx Database Service and the rest of the remaining services can be shutdown
• Preform the Cold Backup
• Start the services

Usage Example 2 (Changes in the worker configuration - By doing this the users will still have access to the gallery and their jobs):

• Make changes in the worker configuration
• Restart only the worker service

Usage Example 3 (Changes in the Gallery Page or Configurations):

• Stop the Gallery Service
• Make the changes
• Start the Gallery Service

Currently, to allow a user to schedule jobs, prioritize jobs, assign jobs, create collections, or have API access, toggles must be set at the user level.  

As a server administrator, I want to configure these toggles at the group level, so that a) I don't have to modify a large number of users individually to grant them such permissions, b) I ensure consistency across groups of users that doesn't rely on humans clicking all the right things for each of the relevant people, and c) I can easily change these settings for multiple people, if needed.

In an enterprise multi-node Alteryx Server deployment that has existed for many years and many upgrades, there are artifacts within the MongoDB that are unknown to Gallery Administrators. I envision a workflow or app that is developed by Alteryx that queries the MongoDB and looks for orphaned documents in the MongoDB across all collections. With 2022.3 there is a pre-upgrade check, however, it does not find all unexpected items within the MongoDB. Regular ongoing MongoDB health helps with overall management of the environment and could prompt for support cases before it becomes a problem during pre-upgrade activities.

Hello, I would like improved user management features and/or training

• Display 100 does not seem to work consistently
• Click /navigate from user to user – once I select a user would like to go to next user
• Changes I make with filters refresh every time I go back – which means I have to constantly reset my view in between each user
• Modify user settings in collections – would like to modify user settings instead of delete and re add user

Would like to see a Notification hierarchy implemented to Gallery. Currently, the settings that control notifications are at the Gallery-level....where only the admin can control, for example, notifying users if a new workflow was added to a collection they belong too. Could this setting be inherited, but then, for example, a Collection owner can implement their own notification settings that overrides the Gallery default? Using the same example as before, perhaps the Collection owner could disable notifying their Users if a new workflow is loaded to the collection.

Nick

*This is an idea from @cneivam  from the Portuguese Community*

• Being able to control the workload in Alteryx Server (for example, making sure that a workflow can run only when another set of workflows finish running)