Be sure to review our Idea Submission Guidelines for more information!
Submission GuidelinesHello all,
This may be a little controversial. As of today, when you buy an Alteryx Server, the basic package covers up to 4 cores :
https://community.alteryx.com/t5/Alteryx-Server-Knowledge-Base/How-Alteryx-defines-cores-for-licensing-our-products/ta-p/158030
I have always known that. But these last years, the technology, the world has evolved. Especially the number of cores in a server. As an example, AMD Epyc CPU for server begin at 8 cores :
https://www.amd.com/en/processors/epyc-7002-series
So the idea is to update the number of cores in initial package for 8 or even 16 cores. It would :
-make Alteryx more competitive
-cost only very few money
-end some user frustration
Moreover, Alteryx Server Additional Capacity license should be 4 cores.
Best regards,
Simon
I think for business purposes it would be great to be able to update the apply for an exemption page that displays when you have a flow that is blocked in safe mode so you could provide accurate documentation to your users about their companies go through an approval process and allowing you to link out to external sites like JIRA to submit a ticket
The full question tree is not visible within the JSON object returned when requesting the 'Questions' in the .yxwz file on the Alteryx Server. There are nested questions that are visible but there is no indication that they are nested, missing label groups, tabs and no indication whether a question should be shown or hidden. This is limiting.
A full question tree in the JSON would allow for dynamic interpretation of the 'Questions' in the .yxwz file as structured through the Interface Designer.
Regards,
Ben
I manage a server with 200 + Artisans. Some of them tend to abuse the Scheduler by having workflows running every hour or every x hours. This can penalize other users creating big queues thought the day. Currently I monitor the queue and schedule often and then contact these individuals to better accommodate their needs.
Having the possibility to disable hourly workflows, or enable to only specific users, would help a lot to deter the abusers.
Thanks,
Mauricio Estevez
It should be possible to trigger the same workflow in different ways from Alteryx Gallery:
- Workflow chaining:
- Workflow B runs after the successful execution of Workflow A
- Workflow B runs after the failure of Workflow A
- Schedule: Workflow B runs on multiple schedules
- API call (even when it is not an analytical app)
For example (considering the same workflow):
- Audit workflow runs every day
- Audit workflow runs every hour during the last day of the month
- Audit workflow runs if triggered by financial close on 3rd party tool
- Audit workflow runs after the execution of the financial workflow
Hi!
It would be very useful if Alteryx would allow users to create folders under their Private Gallery. My private gallery is now 3+ pages long & it would be super helpful to be able to organize the workflows into different folders (Archive/Retail/Linear/Fin/etc), allowing for easier housekeeping & tracking. I realize their is collections but I'm not trying to share anything here, just organize my content for easier viewing.
Thank you!
When a render tool is run on Designer pointed to a temporary file the log gives you a clickable link to access the output. When deployed to the Gallery unless you have given it a specific output destination with %temp% in the filename you get... nothing.
What did I expect? The pdf or other temp file to render on the screen or at least download for me. Or give me a dropdown selection of the various files render could create for me.
Currently, we have the functionality to set a recurring schedule with daily frequency with an option to 'Run only during work week (Mon-Fri)' I would like to add this 'Run only during work week (Mon-Fri)' option to the Hourly frequency interface.
No current option to run on weekdays only:
In Alteryx Gallery admin, please add a confirmation before applying a change to the default user roles. Since it can be changed so easily and isn't very clear to what happens when new admins make a change to that drop down. For example: They do not realize they changed all the default users to curators! But they do learn quickly.
Regards,
John Colgan
With a majority of our Alteryx users working via VPN, our Firewall systems are detecting a brute force attack if a user tries to open another Alteryx tab within 60 seconds. We would like to request to reduce the amount of authentications attempts on the Alteryx Gallery site when launched, so there isn't 100+ 401 unauthorized errors to trigger the Firewall system to disconnect the session.
Ability to change the default workflow settings when to also include [Others may view this workflow's history] in a similar way to the other attributes in workflow settings that are set by default. This would prove beneficial for workflows which are shared across a large team and need to be run on a consistent frequency and are not run headless. The inability to set this by default leaves a risk that the setting remains unchecked and more than one user triggers that workflow in a given month which could result in a material impact if the output of that workflow is posting to another system in the firm.
Hello,
We have been building a solution for a client that involved chaining apps. When we uploaded the workflow to the server, we got the below error: Workflow exceeded maximum runtime of 30 seconds and was cancelled. We were able to rectify this by having the client implement the change here. While I understand the need for the limit, is there any plan to have this fix be more obvious to the average user to implement or avoid needing to reimplement following a server upgrade?
Thanks,
I Would Like a new Email added under [ Admin -> Notifications -> Emails ] where it would send an Email when a Schedule reaches the status "Complete"
This can serve a couple of use cases;
When using In-DB with iSeries over Generic ODBC everything works fine in Designer however when executing via Gallery process fails because a semi-colon ";" is added to the SQL statement as a terminator character and iSeries rejects this SQL0104 - Token ; was not valid. Valid Values < END OF STATEMENT >
We have a MongoDB connection string that we plug in to RuntimeSettings.xml during install. Upon startup, the Mongo connection fails because RuntimeSettings.xml expects the connecting string to be encrypted. The fix for this, is for someone to manually update the MongoDB connection via the Alteryx UI. We would like a way to encrypt the MongoDB connection string for RuntimeSettings.xml before we start Alteryx for the first time.
Hi Alteryx Team,
I understand that the Timeout feature on all Workers is only available for the workflows scheduled on Alteryx Server.
In a heavily used server environment and depending on how workflows are configured, can we have a timeout feature available for non-scheduled workflows (adhoc workflow runs/manually triggered workflow runs) as well on all the Workers on Alteryx Server ?
Thank You,
Nishi Jain
Have the Alteryx Server send a notification when the license is within a configurable amount of days to being expired via SMTP
When there is an app that has multiple tabs across the top but can extend down below the page, the user will scroll down to complete the boxes and click the 'Next' button at the bottom.
This takes the user to the next tab but remains at the bottom of the page.
It would be very useful for this 'Next' button to jump back to the top of the page.
Please could all log file paths on Server have the option to change their location, including
C:\ProgramData\Alteryx\ErrorLogs\AlteryxE2
To enable all log files to be written to an alternative drive than the installation.
The benefit it to prevent excessive space usage on the C: drive
Support have advised there is no way to alter the path or limit these log files by number or size.
Many thanks.
in version 2019.3, with artisan role, I able to add workflow to collection in the workflow page.
I not sure for later version, but in version 2021.4, only curator can do so.
If I uploaded a workflow, designer already give me a link to the workflow, hence if I can add the workflow to the collection.
it goes through 2 pages within 2mins (max). it is very fast for me.
but now, I have to go back to the homepage > collection > add workflow > wait eternal time for server to get the list of workflow > select it > click add.
it extra 5~ steps. with min 10mins extra time. and if the number of workflows larger and larger,
it has chance that it fails to load the list and have to wait another 10mins, and another and another endless 10mins.
so 2mins > endless 10mins? please add back this feature.
Hello! We just upgraded to 23.2, and I see in v3 an endpoint to start a job (v3/workflows/{id}/jobs) and then another to get that job's status (v3/jobs/{jobID}). Compared to v1, I think the outputs endpoint is missing (v1/jobs/{jobID}/output/{outputID}). I'd love for this to be added so we can upgrade from v1 to v3.
User | Likes Count |
---|---|
6 | |
4 | |
3 | |
2 | |
2 |