Alteryx Designer Desktop Ideas

Add Unicode category to the cleansing tool

Hello all,

Change Data Capture ( https://en.wikipedia.org/wiki/Change_data_capture ) is an effective way to deal with changes in a database, allowing streaming or delta functionning. Several technos, more or less intrusive, can be applied (and combined). Ex : logs reading.

Qlik  : https://www.qlik.com/us/streaming-data/data-streaming-cdc

Talend : https://www.talend.com/resources/change-data-capture/

Best regards,

Simon

Credit to @pgdelafuente in his post Export Variables from Assisted Modelling Feature I... - Alteryx Community

This came up in a call with a large client - basically there's no easy way to output the feature importance plot, the accuracy metrics of the selected model (i.e. root mean squared error, correlation, max error, etc.). I would assume this is an easy addition into the Assisted Modeling tools, and perhaps useful for some of the Predictive tools!

It would be wonderful for Alteryx to be able to connect to and query OData feeds natively, rather than using a 3rd-party driver or custom macro.   

OData querying is supported by quite a few familiar products, including Excel and PowerBI, SSIS/SSRS, FME Safe, Tableau, and many others. And the protocol is used to publish feeds from Microsoft Dynamics and Sharepoint, as well as many of the 10,000 publically available government datasets with API's (esp. those hosted by Socrata)   

I didn't see it as in the Idea section, but questions and workarounds have been discussed in the community a few times (11/15, 3/18, 4/18), and suggestions seem to be just to buy the $400-600 ODBC driver from CDATA (or ZappySys), or I could use a VBA script in Excel trigger a refresh, or create my own Alteryx connector macro (great series btw, though most was beyond my understanding!) 

While not opposed paying, kludging, or learning to program, they're just one more thing to build/buy, install, maintain, and break at the most inconvenient time 🙂

Thanks,
Chadd

OData Overview:

OData (Open Data Protocol) is an ISO/IEC approved, OASIS standard that defines a set of best practices for building and consuming RESTful APIs. OData helps you focus on your business logic while building RESTful APIs without having to worry about the various approaches to define request and response headers, status codes, HTTP methods, URL conventions, media types, payload formats, query options, etc. OData also provides guidance for tracking changes, defining functions/actions for reusable procedures, and sending asynchronous/batch requests.  OData RESTful APIs are easy to consume. The OData metadata, a machine-readable description of the data model of the APIs, enables the creation of powerful generic client proxies and tools.

More info at at http://odata.org

It would be useful to be able to select a single container (containing a data input) or multiple containers using Shift, and run those and only those.

When building a new element to a larger workflow, I often enter a new Input in a new container, the ability to run just that container without having to turn off all my other containers would be really useful in speeding up the start of joining things together.

Hope that makes sense.

Thanks,

Doug 

Using the Output tool to send data to a formatted spreadsheet apparently doesn't preserve formatting if the entire column is formatted.  I'd love this changed to keep the formatting when its applied to an entire column.  See this thread in Designer Discussions. 

Idea: Prompt the user to find a missing macro instead of the current UX of a question mark icon.

Issue: When a macro referenced in a workflow is missing, then there is no way to a) know what the name of the macro was (assuming you were lazy like me and didn't document with a comment) and b) find the macro so you can get back to business.

When this happens to me know, I have to go to the XML view and search for macros and then cycle through them until I find the one that's missing. Then I have to either copy the macro back into that location or manually edit the workflow XML. Not cool man.

Solution: When a macro is missing, the image below at the right should be shown. In the properties window, a file browse tool should allow the user to find the macro.

Hello,

SQLite is :

-free

-open source

-easy to use
-widely used

https://en.wikipedia.org/wiki/SQLite

It also works well with Alteryx input or output tool. 🙂

However, I think a InDB SQLite would be great, especially for learning purpose : you don't have to install anything, so it's really easy to implement.

Best regards,

Simon

Would love to see an option to disable a specific Output tool (rather than the global "Disable All Tools that Write Output" option). I'm envisioning the inverse of the Email tool, where there is a checkbox to enable Email... rather, the Output tool could have a check box that would disable that output (and ONLY that output), similar/consistent with the "Disable All Tools" function. A "Disable This Output" check box. The benefits would be a quick way to make sure not to overwrite something in one output (but still getting all the good content in all the other outputs) rather than having to go through the multiple clicks of adding to a container and then disabling the container. Could have benefits for connecting with Action tools/interface toggles as well. It would likely need to contain the same/similar formatting in Designer to indicate it has been disabled, though maybe a slightly different color so you could tell it was disabled differently? 

(On a similar vein, would love to take this opportunity to bring up my favorite idea-that-has-not-been-implemented-yet-that-would-love-your-vote-and-attention, implementing a Warning that outputs are disabled when posting to Gallery...)

Cheers!

NJ

As an international organization we deal with clients in multiple-countries.

Name matches for names including Chinese characters generate a unicode conversation warning and are excluded from the fuzzy match.

It would be good if fuzzy match could be enhanced to handle Chinese characters.

I personally think it would work better to tab from 'Select Column' to 'Enter Expression Here' and not the 'Functions' List as probably people who are tabbing would immediately like to start typing the formula rather than going through functions, fields, etc.

I constantly find my using pre and post SQL Commands in the Output tool to run SQL when I don't actually have any data to output.

One example is when I load data into S3 and want to load it into Redshift. I have SQL code to run but no data to Output - I end up running a dummy row into a temp table.

So can we have an SQL tool that simply acts the same as a Pre-SQL command without the associated data output. Once the command is run we should be able to continue the workflow, so the tool should have an option input and output, like the Run Command tool.

If you forget to put a name on a new column in the formula tool - the error message is 

The field "" is not contained in the record. (Expression #1)

Please could you replace this with a user-friendly message which is self descriptive like:

"Please provide a name for the new column created in expression 1"?

Currently Alteryx does not support writing to SharePoint document libraries.

However there are success sometimes but not at other times.

Please see attachment where we ran into an issue.

See this link for additional information.

https://community.alteryx.com/t5/Data-Sources/Connect-to-and-Publish-Back-to-SharePoint-Online/m-p/4...

We need official support for reading and writing to SharePoint document libraries.

It's an important Output target, and will becoming more so, as Alteryx enhances its reporting capabilities.

Our company has a need to link a new data source in Athena.  We have been able to establish a connection using the input functionality however the connection is so slow it is unusable.  We need to have Alteryx build an In Database option for Athena to allow us to link our data lake to Alteryx.  

After multiple years of using Alteryx, The tabbed document feature was left out of 2022.1.  This feature allows for a much cleaner canvas for exploring workflow and output data.  I view this feature as a basic function of Alteryx, I was surprised to find out that the development team intentionally omitted this function.   I really don't want to revert back to older versions but it may be only the way to have a more comfortable feel of Alteryx.

A simple quality of life improvement that I would love, is the ability to rename the output of the transpose tool in its configuration, rather than only having 'Name' and 'Value' 

Would just let me drop the renaming of these fields afterwards :)

Hey all,

At present, if you have an existing canvas and you want to move to a DCM Connection - you are asked something like "this will reset all of your connection details - are you sure".    If you have complex queries; or pre+post SQL - then you first have to copy all of this out into Notepad before you can convert to DCM and then reconfigure it all again.

However, if you are not using DCM you can change data sources when you go into Workflow Dependancies without losing your queries etc.

Could we revisit the user experience of changing to or from a DCM connection to eliminate this "start from scratch" phenomenon - if you are converging from an existing SQL ODBC or ODB or SSVB connection to a SQL connection via DCM then it should allow you to make this conversion without losing your current configuration; and the same for any other database type.

cc: @mbarone