Alteryx Designer Desktop Ideas

Hello all,

According to wikipedia :
https://en.wikipedia.org/wiki/Embedded_database

An embedded database system is a database management system (DBMS) which is tightly integrated with an application software; it is embedded in the application.

It's often like a single file/dll that you can use inside an application without the user having to connect (or at least to configure it) to it (it's all done inside the application). So, it's widely portable.


Why it does matter ?

As of today, there is not a single example of in database workflow because all the supported databases need the user to:

1/install an odbc driver (most of time, he won't have the rights to do so)

2/configure an odbc connection (sometimes, he doesn't have the rights to)

3/configure a connection on Alteryx (ok, he can)
So it requires IT action, which can be pretty long (in ùany organization, it requires several weeks !!). And even with all of that,the users must be granted privilege to access database and the customer need to develop its own examples and write its own specific documentation.

Well, this is not efficient.

What I suggest is Alteryx to use one of embedded database for training support/one tool examples. SQLlite seems good, maybe a more analytics oriented (like DuckDB ) would be more efficient.
The requirement are, I think, the following :
-OpenSource and free
-Fast
-SQL compliant
-With a bulk load ability

Best regards,

Simon

Hello all,

Sometimes, when you have too much time to retrieve your tables metadas, you can have this message

Initialization Timed Out: Workflow must be run for field meta info to be accurate.

From what I understand, it's Alteryx and the source system that drives the time out value. However, I have some cases where the long time is "normal" and that really hurts the user experience.
So, I would like the ability in settings to change the default value.

Best regards,

Simon

Hello all,

The reasons why I would the cadence to be back to quarter release :

-for customers, a quarter cadence means waiting less time to profit of the Alteryx new features so more value

-quarter cadence is now an industry standard on data software.

-the new situation of special cadence creates a lot of frustration. And frustration is pretty bad in business.

-for partners, the new situation means less customer upgrade opportunities, so less cash but also less contacts with customers.

Best regards,

Simon

When making any type of macro, it's important to test the functionality of the macro via a debug.  This is accomplished successfully with normal tools, however there's a bug that will not allow the user to debug In-DB macros that use either of the following standard Alteryx tools:  

• Macro Input In-DB
• Macro Output In-DB

If either of these tools are included in the macro you are building, an error message will appear not allowing you to open a debug.  

Error message: Question Tool Load Error:  A question tool with a tool id of XXX is missing the associated question data.

Of course, Macro input and output tools do not require any specific action/question tool associated with it.  This is a bug.  A user pointed out the XML issue almost 3 years ago here:

In summary: "It appears that the tool itself inserts a hidden Question attribute into the XML which can also be seen in Workflow Configuration"

Source:

https://community.alteryx.com/t5/Alteryx-Designer-Desktop-Discussions/In-DB-Macro-Input-and-Output-t...

Examples....

A normal macro, using standard tools:

After debugging a standard macro, the Macro Input/Output tools correctly change to a Text Input and a Browse tool.  This allows the macro author to test the macro.

However, when trying the same thing with In-DB tools in a macro, an error message appears:

In-DB macro 1:

In-DB Macro error message (after clicking "Open Debug"):

We currently have language support for a few major languages. I know Chinese is available, but the writing system is only Simplified at this moment. 

I was recently in conversation with a few people from Taiwan, and they are using the Traditional writing system of Chinese. 

If Alteryx can provide Traditional as an additional to their already available Simplified writing system, I think Alteryx can help capture the market in Taiwan better. 

The people I spoke with never heard of Alteryx before, and after a demo - they were impressed. If it has this language support, then I think it’ll be much easier to get more sign ups for Alteryx from the Taiwanese market. 

For all Alteryx versions I can remember, when entering a connection string into an input tool (e.g., "C:\Users\mbarone\Desktop\ . . . "), you could just start typing and it would auto-complete.  This is no longer the case when DCM is enabled.  This is a huge efficiency hit we're taking, and is enough for us not to enable DCM (optional or otherwise), given the fact that current workflow connection manager works just fine (meaning the "akas").

Please bring back auto-complete/predictive text when DCM is enabled.

So our company is relatively new to Alteryx Designer and Server and we recently found out that there's no official communication sent out from Alteryx on when there are patch releases for Designer and Server. We've encountered so many bugs that we later found on the release notes that would've been helpful to know about months before.

So my suggestion is to have an option for Administrators to opt in/out for communication emails on when the patches are released.

Thank you!

Whenever I output the Count using the Summarize Tool I am unable to tell it to sort the results by Count and am forced to grab a sort tool.  It would be nice to offer a sort option from within the Summarize tool itself instead of requiring a subsequent sort tool or to use the Results window to manually sort it.

Requesting a reduced-cost, read-only license to allow for additional users in our organization be directly review workflows for UAT and control testing.  Currently, the only individuals who can see the detail of Alteryx workflows directly are those with a full designer license or temporary trial license.  In our Alteryx control structure, we have additional reviewers confirming the workflow who do not have licenses, which requires copious amounts of screenshots and/or direct meetings with our licensed designers to walkthrough the flows step-by-step.  It would be much more efficient to provide a license that would allow folks to click through the integrations themselves, potentially allowing for comments and annotations, but without the ability to make direct changes.  This would be much more cost efficient for our organization and allow for better workflow review and control.

I find it extremely annoying having to individually disable/enable control containers in a workflow.  It would be nice if there was a way to select all control containers that I want to disable/enable and then be able to right click and do it quickly in one motion.  This would save me a lot of time when working with 10+ control containers.

It would be great if we could add example workflows to our macros, accessible in the same way as from the original tools (example hyperlink shown after single-clicking on a tool in the tool palette or when searching in the search bar).

There is a post on how to do it for custom tools How to add an example link in the custom tool (alteryx.com). The way described there has limitations and does not seem to work on macros: I was able to get the link to show up, but nothing happens when I click.

My suggestion, make it easy to add an example workflow to a macro, like it is to change the logo or add a help link.

Formula Tool --> Functions --> Operators list

The operator titles for the two comment functions are too similar, the difference cannot be determined unless checking the hover text.

Can the title for /* Comment */ be adjusted to make it more clear that it is for block or multi-line usage?

I didn't understand the difference until I saw this post on LinkedIn:
https://www.linkedin.com/feed/update/urn:li:activity:7165816592063266817/

/* Comment */ --> /* Block Comment */   |   /* Multi-line Comment */

We have lots of tools that create new column(s) from the Inputs, e.g., Generate Rows. It'd be very nice if the new column(s) is/are highlighted in the Output. This makes it a lot easier for users when developing the workflow.

How about a “Temporarily Disable Tool” feature where the tool is disabled?  Just the same as the "Disable All Tools that Write Output" but would only apply to the specific tool you select.   But, Instead of having to delete or cut the tool and connect around (as this can be tedious)!  The feature could be applied to various preparation tools (and potentially more) to help save time.

For example, there are occasions when I might have a filter applied and would want to temporarily disable the tool only to see all results.  This has been the case when I have wanted to include hospital wards (by temporarily disabling the tool) I was filtering out to review in the summarized totals.

The specific tool could have the same hashed marking as the "Disable All Tools that Write Output".   The "Temporarily Disable Tool" feature could be listed when the specific tool is right clicked on.   - The workflow could also prompt to show that the user has a tool "disabled" to highlight to the user.

Edit: Spelling

This is a feature request based on my comment submitted here: Email Tool: Format "From" field to accommodate "Di... - Alteryx Community

It would be great to provide an option in the Designer Email Tool to allow us to specify a "Display Name" when sending emails.  The "Display Name" is a common part of the email specs listed here: RFC2822 - Section 3.4 (Address Specification) 

The email gateway/service that I'm using will send emails, but the "From" line will reflect only the email address.

For example, it will show an email as being from "john.smith@example.com" where I would love for it to show up as from "Smith, John".  This would make emails appear like other internal company emails in our company Outlook clients, and in general provides more useful flexibility for the Email tool. 

Many other email clients support using Display Name, but it appears that Alteryx currently doesn't.

The format of an email address with Display Name is something like "Smith, John" <john.smith@example.com> (with or without the quotes).

Alteryx gods,

It would make me even happier than I am now if it were possible to tailor the completion messaging in the Interface Designer when an analytic app completes.

Currently, we use rendering etc, but sometimes we simply want to be able to create a bespoke completion message.

My example is as follows:

In the app you have the option to download files, or have them emailed to you. If you choose download, the final display is the render tool with the documents listed, however, if you choose email I want nothing to show but the final window with the message "Please check your email" or something. There may be more than one option, and so being able to dynamically change these messages would be very useful.

Help me Alteryx gods, you're my only hope.

*beep boop boop*

Hi

The action of the 'tab' key in configuration window recently appears to have changed from indenting to a navigation function. 

The user should be able to select which action the tab key performs. 

Alternatively, tab should indent and shift-tab (or alternative) navigate. I'm not the only one who would appreciate the choice.

PuffinPanic

In the RecordID tool,  provide additional options for the creation of the ID, specifically allow for the ID to 'Intervals'. 

For example, Record ID every 10, meaning instead of creating an ID of 1, 2, 3, 4, 5 .... you could create an interval of your choosing, the most obvious would by 10 or 100  thus your ID's would then be 10, 20, 30, 40 ....  or  100, 200, 300, 400, 500 ... etc. 

Ability to ‘name’ the point created in the “Create Points” tool.

Instead of sticking a select tool after it to rename it from ‘centroid’ to Starting Location or Store location or whatever.