Alteryx Designer Desktop Ideas

Hello,

It would be very helpful to have a search box for field names in the summary tool, I think it would help decrease errors by selecting fields by mistake with similar names and will help gain a couple of seconds while looking around for a specific field, particularly with datasets with a lots of them.

Like this:

It would be nice to be able to concatenate numeric values (integers, doubles, etc.) directly in the Summarize Tool.

I know this would involve converting it to a string on the backend, but I don't believe there would be any data loss when going from numeric to string. I know this can be done by using other tools like Select of Formula to convert to string before the summarize but I don't see any reason why this couldn't be accomplished in a single tool.

Thanks,

Paul

Extend the MongoDB tool to work with Atlas MongoDB instances.

Hi all,

When debugging an error, we need to verify tool by tool in a sequence to better understand what is really going on.

Sometimes the tools are miles away from each other. Imagine a gigantic workflow with a lot of connections going back and forth and wireless connections everywhere to help the workflow organization. Here is an example with more than 1300 tools: 

My idea is to have a shortcut showing all the previous/next tools and by selecting the previous/next one you go directly to them.

Something like this: 

What do you guys think about that?

Best,

Fernando Vizcaino

We have 'CountDistinct' and 'Concatenate' options within Summarize tool. 

But 'Concatenate' displays all the instances of value for a Grouped field, this might include lot of duplicates.

It would be great to have an option like 'ConcatDistinct'.

For example - 

Group by 'Branch' and 'ConcatDistinct' Customer should result as Figure 1 instead of Figure 2 - 

Figure 1-

Figure 2-

While this is achievable in different ways currently with a set of tools, but it gets tedious when number of fields is large from which distinct values are to be captured. 

Thank you,

Rohan.

We frequently have issues where users report slowness from an Alteryx installation on a particular machine; or where a specific tool or package fails to install correctly.

For our admin teams - this becomes a debugging exercise to go through different permutations to understand the cause - and if this is escallated to Alteryx Support, this becomes even tougher.

Could we think about including a basic "Self Diagnostic" in to Alteryx which runs through the basic functionalities of Alteryx with some basic timings; checks that Python is working correctly; checks the memory allocation and temporary disk space - and then either persists this to disk and/or sends to a central environment for analysis?

Given a large deployed environment like ours (over 10 000 seats deployed) - self-checkout-telemetry like this would provide the central team with massive increase in their ability to manage the deployed base; and at the same time signficantly reduce the time to resolve support issues.

Hi,

A lot of companies now are deploying on both AWS and Microsoft Azure.

Alteryx supports AWS S3 object storage out of the box, it would be important to support Microsoft Azure blob as part of the native Alteryx product as well. 

Cheers,

Adrian

The SQL Editor window could have a better presentation of the SQL code; two issues observed

• First, that it's simply plain text without even a fixed-width font, much less syntax highlighting
• Second, if you type in some manually formatted SQL code (e.g. with line feeds and indentation), then click on the "Visual Query Builder" button, then click back to the "SQL Editor" button, all the formatting is lost as it is converted to one run-on line of code, which is very difficult to read.

I understand that going between the Visual Query Builder and the SQL Editor is bound to have some issues; nonetheless the "idea" is to allow a user friendly display in the SQL Editor window:

• Use a fixed width font, (should be trivial to implement)
• SQL formatter, implementation ideas can be found here: https://github.com/TaoK/PoorMansTSqlFormatter
• SQL syntax highlighting, implementation ideas can be found here: https://github.com/jdorn/sql-formatter

My "implementation ideas" are based on a couple minutes with google, so hopefully this is a very feasible request; my user base is very likely to spend more time in the SQL editor than not, so this would be a valuable UX addition.  Thanks!

When we create new workflows, we like to have them in our company template, to stnadardise documentation. This makes it easier for a supervisor to review, and for a colleague to pick up the workflow and understand what is going on. For instance, we have all data input on the left, and all error checks and workflow validation on the right, and a section at the top with the workflow name, project name, purpose etc. We have a workflow that we use as a template with containers, boxes and images all in the appropriate places

It would be great if there was an option to select a workflow as a template. When a new workflow is opened, it would load this template rather than having a blank canvas.

As of today, for a full refresh, I can :

-create a new table

-overwrite a table. (will drop and then create the new table)

But sometimes, the workflow fails and the old table is dropped while the new one is not created. I have to modify the tool (setting "create a new table")to launch it again, which may be a complex process in companies. After that, I have to modify it again back to "overwrite".

What I want :

-create a new table-error if table already exists

-overwrite a table-error if table doesn't exist

-overwrite a table-no error if table doesn't exist (easy in sql : drop if exists...)

Thanks!

Apologies if this has been suggested already - did a search and didn't see anything similar.

This is a quality of life/UX idea. The search functionality in the results pane essentially does a 'contains' search on all of the columns (see below screenshots for the filter inserted by the 'apply data manipulations button). As I build workflows and profile the data, it'd be helpful if I could click one or more columns and limit the search bar to just those fields.

Right now, depending on the dataset I could get rows returned by the search due to the search term appearing in columns that aren't relevant. To workaround this I could add select tools to limit the columns or do more robust filters in a filter tool, but having it built in would be very helpful.

I will start off with a story. I have built a process to manage batch API requests. It's an iterative process that checks to see where the export is at by calling an API and then returning some status. It will run and wait and run and wait until the export is ready to be downloaded. However sometimes, the jobs don't finish and a status returns something like "failed" or "cancelled". When this is the case, I have my process (which is a little bit batch macro) kicks off an error message, using the nifty error message tool. After some time I noticed that it was a PAIN to go back and figure out which of my requests failed and I decided that I need to add some messaging around where this was failing, so I could do some easy auditing. So I go back into my tool and much to my chagrin, I cannot pass variables into the message section. I would expect it to have worked something like this:

"Record "+[#2]+" is not 'A'"

Can we please get a change to this. It would save a lot of time and energy if we could create a dynamic error message option.

TL;DR Please allow us to use formulas in the "If expression is true, display error message:" settings area.

Statistics are tools used by a lot of DB to improve speed of queries (Hive, Vertica, etc...). It may be interesting to have an option on the write in db or data stream in to calculate the statistics. (something like a check box for )

Example on Hive : analyse {table} comute statistics; analyse {table} compute statistics for columns;

A few suggestions that I think can improve the Sharepoint Files Output Tool:

1. Maybe I'm missing it, but I cannot see how you can delete a file from the output list once you've added it:
   1. 

       

      
      

       

2. Have the write headers output checkbox ticked by default as I expect this is the more common expectation:
   1. 

       

3. Take the file extension by default based on the users selection in the Options tab as I shouldn't have to write .xlsx for the extension:
   1. 

       

   2. 

       

@VojtechT 

This has probably been mentioned before, but in case it hasn't....

The dynamic input tool is useful for bringing in multiple files / tabs, but quickly stops being fit for purpose if schemas / fields differ even slightly. The common solution is to then use a dynamic input tool inside a batch macro and set this macro to 'Auto Configure by Name', so that it waits for all files to be run and then can output knowing what it has received. 

It's a pain to create these batch macros for relatively straightforward and regular processes - would it be possible to have this 'Auto Configure by Name' as an option directly in the dynamic input tool, relieving the need for a batch macro? 

Thanks,

Andy 

When building out Alteryx workflows there may be a need to read in different ranges within the same Excel spreadsheet. For example bringing in a table from Sheet1, but also isolating a table name in a particular cell (in my example cell C8).

When turning this into an analytic app, with a file browse is to add an action tool with the default value of "Update Input Data Tool".

However when specifying this option within the analytic app interface, you are only allowed to chose one option of the following:

i) Select a sheet

ii) Select a sheet and specify a range

iii) a named range or

iv) a list of sheet names.

The problem is in the example above I need a sheet and a range, but I want to avoid adding two file browse interface tools as it shouldn't be needed. If the user selects (i) then it loses the reference to cell C8, but I would imagine a lot of users as they get started with apps don't realise this is what will happen.

There is however a way to solve this currently and it requires overwriting the default behaviour and configuring the second action tool (the one that updates the file for C8), to update value with a formula, where you assume the user would select sheet name and then use this formula:

replace([#1],"$`","$C8:C8`")

However I would argue that this has a lot of technical debt, plus if the user needs to modify where the header is, for example to D8 they need to change the input file and the action tool so it works as a workflow and an analytic app.

Solution

Like how the configuration options for the input file, such as which row to input data from or whether first row contains data is maintained, modify the behaviour of the default option in the action tool to maintain references to ranges.

When you have a "reminder"/"Notification" , there needs to be the option to permanently ignore the update.  

Some updates only give you a timeframe for ignore/remind as little as 7 days. There should absolutely be options for longer time frames, and should include a permanent reminder of do not display/remind me of 'this' update again. 

Fine for another reminder when there is another new update, but don't repeatedly place the notice of a reminder for the same system/version/data set etc etc etc update. 

There are times companies don't provide updates for a year or more. You shouldn't have to keep dismissing update reminders/notices when you don't intend to update until maybe the next version or a year from now. 

Remove the constant update notification. 

It would be great if we could have a Windows Active Directory data connector tool added to the standard Alteryx toolset.

MS Excel Power Query and PowerBI both can connect to Active Directory for use as a data source, but are both very cumbersome to use.  Having a connector in Alteryx that can read AD data into a workflow would be super helpful for a long list of use cases.  A couple that are top of mind for me are:

-Leveraging group membership info for dynamic distribution of reports or datasets

-Being able to build reporting and dashboards about the organization (useful for Tech audit, HR, etc.) 

I've seen links to an old project on GitHub of someone that started development on this, but the method (just copy these random .dlls into your program directory) is seriously frowned upon by any enterpise IT.  Would be great if Alteryx could pick up that work, polish it a bit and add it to the actual Alteryx Designer toolset.

DearAlteryx team and community,

all the best for 2021!

Thank you very much for enhancing the output option from Alteryx Designer to Excel keeping the format.

For a lot of my use cases this is very helpful!

Still, there are some use cases left. In case I want to overwrite a calculated/linked number (e.g. calculated prediction) with the Actual number, it would be very helpful to feed into those cells as well. At the moment Alteryx is doing the job but I receive a lot of Excel Errors (xml errors) and a corupt Excel file when overwriting calculated fields/linked fields.

Is there a chance to extend the current setup for all of those cases?

Thanks and best regards

Chhristoph