Alteryx Designer Desktop Ideas

The Email tool does not send out e-mails after an error occurred in the workflow. Since this usually is a good thing, it sometimes would be helpful being able to send out e-mails also in case of errors.

In particular, I want to send out an e-mail with a detailed and formatted custom error message.

Thus, please add a check box "Also send mail in case of errors" which is off by default.

Side note: The Event "Send mail After Run With Errors" does not work for me because it is too inflexible. Just sending out the OutputLog is not helpful because the error message might be hidden after hundreds of rows.

Hello,

A lot of tools that use R Macro (and not only preductive) are clearly outdated in several terms :
1/the R package
2/the presentation of the macro
3/the tools used

E.g. : the MB_Inspect

Ugly but wait there is more :

Also ; the UI doesn't help that much with field types.

Best regards,

Simon

as an analysis software. The result window plays a crucial role.
However, the numbers are not left-aligned, making it difficult to identify the number in the first grant.

and as most coding editor, monospace is recommend. it help to identify text length as well

Suggested Settings Adjustments:

1. Change of Font Type and Size: Include options for different fonts, including monospace.
2. Alignment: Provide options for left, right, and center alignment.

3. Option show whitespace

I would love to have the option to easily disable a section of the workflow while diverting around the disabled tools.

I know the Detour and Detour End tools exist, but I think this functionality could be improved.  My idea would be either/both of the following functions.

Break links between tools.  Think of a workflow as a circuit board and the connection paths between tools as parts of a circuit.  With every tool connected/enabled the full circuit is complete.  However, if there is a section of the workflow which is temporarily unneeded, it would be great to have the option to break the connection between tools and then reconnect at a later point to complete the circuit.  My idea would be to have the option on a line/path to break the connection temporarily (greying out the tools downstream) and enabling it further downstream.  It's similar to what the Detour and Detour End do, but without needing additional tools on the canvas

Alternatively, if you were to select the unneeded tools in the workflow and place them into a container, then disable it, it could skip those disabled tools without breaking the circuit.
[ tool ] ---- [ tool ] ---- [ tool ] ---- [ tool ] ---- [ tool ] ---- [ tool ]

I would love to see an option to run only one container without having to disable all others (and tools not in containers).

I've got workflows with MANY different queries/tools each in their own containers and some tools outside of containers.  Occasionally I need to run or re-run just one of the containers (usually several times when the datastream contains Crosstab or Transpose tools where some fields/options will not populate until the workflow has previously run).  Normally I'd either have to disable all other containers and/or select EVERYTHING that I do not wish to run an add them all to another container that I could then disable.  An option to disable everything outside of a specific container would be most welcome and save a lot of time!

The Predictive tools, such as Linear Regression, come with the Alteryx Predictive Tools download, which is in the Alteryx Designer license download option. You have to click Download, then click the radio button for the version you want and click next, then have to download the Alteryx Designer AND the Alteryx Predictive Tools. This has caused confusion - based on the name (Predictive Tools), many, including myself, thought that they would be a part of the Alteryx Intelligence Suite license; I didn't have that, so thought I couldn't use them. But it turns out that they aren't a part of the AIS license, but the regular Alteryx Designer license. I just had to go through that confusing process of downloading Alteryx Designer and Alteryx Predictive Tools. To help customers avoid confusion and make it simpler, it would be awesome to have a single option that would get me both (just having to download Alteryx Designer instead of Alteryx Designer AND Alteryx Predictive Tools).

When jobs have run successfully in scheduler, retain a baseline average so when items are in the queue much longer than normal, an alert can be sent.

This will allow us to kill stuck jobs and free up resources.

Hi,

I appreciate this could be a repeat of this topic but I'm not able to find it easily if it is. 

I want to locate a column in my results window with a simple search functionality. I'd like to search for a column and then it'll present back to me potential columns that I could then select to move me to in the results window. It's painful with a lot of columns to keep scrolling to find the one you're after:

All the best,

BS

When a workflow group is created/saved, could it by default always open the tabs in the order they were in when the Workflow Group was created?

As of now, the workflow tabs open at some undeterminable order and the user must take great care to switch from tab to tab in intended order. Sometime they are in the "correct" order, other times they randomly appear in different order. 

Hello all,

As of today, you can only (officially) connect to a postgresql through ODBC with the SIMBA driver
help page :
https://help.alteryx.com/current/en/designer/data-sources/postgresql.html#postgresql

You have to download the driver from your license page

However there is a perfectly fine official driver for postgresql here https://www.postgresql.org/ftp/odbc/releases/

I would like Alteryx to support it for several obvious reasons :
1/I don't want several drivers for the same database
2/the simba driver is not supported for last releases of postgresql
3/the simba driver is somehow less robust than the official driver
4/well... it's the official driver and this leads to unecessary between Alteryx admin/users and PG db admin.

Best regards,

Simon

When running a job in the gallery, a file output has to be chosen every time, even if there is no other option. I propose that under "My Profile >> Workflow Defaults" users be able to choose a preferred default file format for outputs. If it is available then the gallery will automatically choose that, otherwise the user can pick. 

Parquet is a very fast, efficient and widely used data format, currently only below Parquet compression algorithms are supported and we cannot use Alteryx to read the parquet file that generated by other processes. This limits our usage in Alteryx.  

• Read support: Snappy and Gzip compression algorithms.

• Write support: Snappy only

It would be great for Alteryx to support all types of Parquet format so we can maximize the use of Alteryx in data analysis.

I work with lots of Excel files, and because they don't always consistent schema, I'm often changing the configuration.

The default Window frame/window for the "Options" panel in the Input data tool only shows 3-4 rows, plus title (the section in RED in the image below).  As I have large screens 

The panel size can be resized by dragging the line above the "Preview (first 100 records)".  However, once I move from this tool, if I return to the tool, it defaults back to 3-4 rows, plus title.

I would like to be able to set the default size of the Options panel/frame/window.

• This would improve my efficiency when setting up flows
• This would improve debugging - I would be able to see all my parameters at a glance

Dear Alteryx, 

One day, when I pass from this life to the next I'll get to see and know everything!  Loving data, one of my first forays into the infinite knowledge pool will be to quantify the time lost/mistakes made because excel defaults big numbers like customer identifiers to scientific notation.  My second foray will be to discover the time lost/mistakes made due to 

Unexpanded Mouse Wheel Drop Down Interaction

Riveting right?  What is this?  It's super simple, someone (not just Alteryx) had the brilliant idea that the mouse wheel should not just be used to scroll the page, but drop down menus as well.  What happens when both the page and the drop down menu exist, sometimes disaster but more often annoyance.  Case in point, configuring an input tool.

See the two scenarios below, my input is perfectly configured, I'll just flick my scroll wheel to see what row I decided to start loading from 

Happy Path, cursor not over drop down = I'll scroll down for you ↓

Sad Path, cursor happened to hover the dropdown sometimes on the way down from a legit scroll = what you didn't want Microsoft Excel Legacy format?

And you better believe Alteryx LOVES having it's input file format value changed in rapid succession., hold please...

Scroll wheels should scroll, but not for drop down menus unless the dropdown has been expanded.

Oh and +1 for mouse horizontal scrolling support please.

Whenever I output the Count using the Summarize Tool I am unable to tell it to sort the results by Count and am forced to grab a sort tool.  It would be nice to offer a sort option from within the Summarize tool itself instead of requiring a subsequent sort tool or to use the Results window to manually sort it.

I was exploring how to make the Outlook 365 tool run faster, and I noticed in my Action tool that there are Start and End Date parameters. However, they come across as these large numbers. I learned today from Alteryx Support that "The numbers you provided for StartDate (1725163200000) and EndDate (1726751052709) represent Unix timestamps in milliseconds. Unix timestamps indicate the number of milliseconds that have passed since January 1, 1970, at 00:00:00 UTC."

While I am attempting to build a custom macro myself, it feels like this enhancement could just be included in the tool itself! Relatively simply conversion using DateTimeDiff([#1],"1970-01-01 00:00:00",'milliseconds') 😊

Edit: it's there for the Calendar option, but ideally it could be included for the Email option too! And while you can you the search parameters, we could make it easier for the user.

Whenever I start something in Alteryx Designer which takes some time (e.g. opening a workflow), and I want to do something in another application in the meantime (e.g., Explorer), Alteryx Designer repeatedly catches the Windows focus back and brings Alteryx Designer to the front, interrupting my work in the other application. And Alteryx does this really multiple time during an action (often multi times per second), not even only when finished, causing me to  have to press Alt-Tab multiple times to get the other window in the front again).

First, this is annoying: If I purposely select a different tool to be in the front I want to work in that tool and not be disturbed by a different tool that catches the focus back.

Second: This cannot be good for performance. Sending the "I want the focus" signals to Windows also takes time.

Suggestion:

Switch off all requests for getting the focus in entire Alteryx Designer. Instead, the Alteryx entry in the task bar might blink once or twice in green when the background action is completed.

If there are people who like this catching focus thing, then please introduce a setting so that it's possible to switch it off.

• Have anyone experienced the same error?
• If yes, is there any workaround to connect with M365?

When using "Find and Replace", the content of the search term field ("Find") is cleared when switching between workflow windows. From my perspective, there's no reason for that. Why does Alteryx Designer decide that I don't want to search for the same term in another workflow?

Please change that behaviour that content in "Find", "Search Locations", and "Replace:" are preserved when switching between Designer windows.