Alteryx Designer Desktop Ideas

This is a pretty quick suggestion:

I think that there are a lot of formulas that would be easier to write and maintain if a SQL-style BETWEEN operator was available.

Essentially, you could turn this:

ToNumber([Postal Code]) > 1000 AND ToNumber([Postal Code]) < 2500

Into this:

ToNumber([Postal Code]) BETWEEN 1000 AND 2500

That way, if you later had to modify the ToNumber([Postal Code]), you only have to maintain it once.  Its both aesthetically pleasing and more maintainable!

in our organization people are moving away from network drives to BOX for file repository and they needs to use to connect to BOX using Alteryx as an Input and Output platform where they should be able to access files to read and write. 

Currently few of the users are able to use the BOX as a repository using BOX Sync tool (Map BOX as a network drive) but that is not at all useful when they try to save into a gallery and run or schedule on the gallery. A connector for BOX will be of great help. 

We have discussed on several occasions and in different forums, about the importance of having or providing Alteryx with order of execution control, conditional executions, design patterns and even orchestration.

I presented this idea some time ago, but someone asked me if it was posted, and since it was not, I’m putting it here so you can give some feedback on it.

The basic concept behind this idea is to allow us (users) to have:

• Design Patterns
  • Repetitive patterns to be reusable.
  • Select after and Input tool
  • Drop Nulls
  • Get not matching records from join
• Conditional execution
  • Tell Alteryx to execute some logic if something happens.
  • Record count
  • Errors
  • Any other condition
• Order of execution
  • Need to tell Alteryx what to run first, what to run next, and so on…
  • Run this first
  • Execute this portion after previous finished
  • Wait until “X” finishes to execute “Y”
• Orchestration
  • Putting all together

This approach involves some functionalities that are already within the product (like exploiting Filtering logic, loading & saving, caching, blocking among others), exposed within a Tool Container with enhanced attributes, like this example:

The approach is to extend Tool Container’s attributes.

This proposition uses actual functionalities we already have in Designer.

So, basically, the Tool Container gets ‘superpowers’, with the addition of some capabilities like: Accepting input data, saving the contents within the container (to create a design pattern, or very commonly used sequence of tools chained together), output data, run the contents of the tools included in the container, etc.), plus a configuration screen like:

1. Refers to the actual interface of the Tool Container.
2. Provides the ability to disable a Container (and all tools within) once it runs.
   • Idea based on actual behavior: When we enable or disable a Tool Container from an interface Tool.
3. Input and output data to the container’s logic, will allow to pickup and/or save files from a particular container, to be used in later containers or persist data as a partial result from the entire workflow’s logic (for example updating a dimensions table)
   • Based on actual behavior: Input & Output Data, Cache, Run Command Tools, and some macros like Prepare Attachment.
4. Order of Execution: Can be Absolute or Relative. In case of Absolute run, we take the containers in order, executing their contents. If Relative, we have the options to configure which container should run before and after, block until previous container finishes or wait until this container finishes prior to execute next container in list.
   • Based on actual behavior: Block until done, Cache, Find Replace, some interface Designer capabilities (for chained apps for example), macros’ basic behaviors.
5. Conditional Execution: In order to be able to conditionally execute other containers, conditions must be evaluated. In this case, the idea is to evaluate conditions within the data, interface tools or Error/Warnings occurrence.
   • Based on actual behavior: Filter tool, some Interface Tools, test Tool, Cache, Select.
6. Notes: Documentation text that will appear automatically inside the container, with options to place it on top or below the tools, or hide it.

This should end a brief introduction to the idea, but taking it a little further, it will allow even to have something like an Orchestration layout, where the users can drag and drop containers or patterns and orchestrate them in a solution, like we can do with the Visual Layout Tool or the Interactive Chart tool:

I'm looking forward to hear what you think.

Best

Ever tried to copy a field rename from one select tool to another, or from one summarize tool from another.

Have you noticed that it doesn't work?

I think it should. 🙂

i.e., if you click on the rename box ("Total") and enter ctrl-c, when you enter ctrl-v in the other tool, it pastes this:

Field2 Sum Total

not just the name "Total"

Instead of just the renamed field "Category", the select tool pastes this:

True Field1 String 1 Category

In the tools that embed the "Rename" option (Select, Append Fields, Join, Join Multiple), copying the new name will copy all the information of the field configuration : tick/untick, original field name, type, size, new name and description.

Renaming the field "Rename_Field"

In my opinion, it should copy only the new name. This would be useful, especially because when you change the name of a field, it isn't automatically changed in subsequent tools, so copying it to replace it in those tools is faster than retyping it every time.

Idea: Prompt the user to find a missing macro instead of the current UX of a question mark icon.

Issue: When a macro referenced in a workflow is missing, then there is no way to a) know what the name of the macro was (assuming you were lazy like me and didn't document with a comment) and b) find the macro so you can get back to business.

When this happens to me know, I have to go to the XML view and search for macros and then cycle through them until I find the one that's missing. Then I have to either copy the macro back into that location or manually edit the workflow XML. Not cool man.

Solution: When a macro is missing, the image below at the right should be shown. In the properties window, a file browse tool should allow the user to find the macro.

I think I'm liking the new UI, but I think it's necessary to bring back save, undo and re-do buttons....

1. Frequent saving of workflows is crucial and not everyone uses keyboard shortcuts

2. The ability to undo (lots) of changes is a key part of iterating and rapidly building workflows in Alteryx and again not everyone uses keyboard shortcuts to do this.

Looks like there's potentially space to add this to the right of 'help' (I suspect this might be technically quiet difficult) or to the left of 'run', 'schedule' and 'active documents' as seen in the image below.

Out of interest, where has the 'documents' terminology come from?

It would be nice if we can arrange some tools on the canvas neatly by one click and having them distributed evenly (horizontally/vertically).

See this picture which worth thousand words.

Can you put a check box on the container title bar to make it easier to enable/disable containers in the process window? And can you make the minimize/maximize option for a conatiner a separate option from enable/disable?

Hey all,

The join tool currently does not allow case-insensitive joins, but the find/replace tool does.    Additionally- even if both sides are identical, the join tool will not join "Sean's house" to "Sean's house" because of the non-letter character in the middle.    Finally - if one side is a string(2), and the other is a vString(200) - even if you have a single identical character on both sides you get uncertain outcomes unless you force the type

Please could you consider amending the join tool to include 3 new options or capabilities:

- Case insensitive join

- Allow full Unicode character set in join

- Full match across text types (irrespective of string size) - this would allow a string(2) value to match to a string(100) value as long as the string(100) value only has the same 2 characters in it as the string(2) value

That would remove a load of work from every text-join that's being done on every canvas we do.

Thank you 

Sean

A very useful and common function
https://www.w3schools.com/sql/func_sqlserver_coalesce.asp

Return the first non-null value in a list:

Hello all,

As of today, Alteryx proposes the Intelligence Suite with amazing tools never seen in a data tool, even OCR, image analysis etc.. https://www.alteryx.com/fr/products/intelligence-suite

But... these wonderful tools are part of a paid add-on. And this is what is problematic :

-Alteryx is already an expensive tool. With a huge value but honestly expensive.

-The tools in Intelligence Suite are not common in data tools because you won't use often. And paying for tools you use once or twice in a month is not easy to justify.

So, I suggest to incorpore Intelligence Suite in the core product. The Alteryx users benefit is evident so let's see the Alteryx benefits : 
-more user satisfaction
-a simpler catalog
-adding a lot of value to Designer, with the ability to communicate widely on the topic.

-almost no cost : most costumers won't buy the Intelligence Suite anyway.

Best regards,

Simon

After using the Text to Columns tool, I generally find myself using a Select tool to get rid of the original field that I split up. Could an option be added in the config to automatically delete this field once it is split to columns?

The JOIN tool could use some love.  Let's consider merging the JOIN and UNION functions into a single tool.  Instead of strictly L, J, and R outputs, we could have an option to allow for all standard SQL joins:

• Cross Join (Warning!!!)
• Inner Join (boring)
• Left Outer Join (saves time configuring Union)
• Right Outer Join (saves time ...)
• Full Outer Join (saves time ...)

Being able to JOIN on case-insensitive values is a big bonus (resisted urge to BOLD and change font size).

Being able to JOIN on date-range is often requested.

Being able to JOIN on numeric-range is often requested.

If we are combining tools, getting UNIQUE on L or R (or both) inputs would also save time.  Most JOIN errors are because the incoming (R) data contains duplicates by KEY.

cheers,

Mark

Hi @NicoleJ 

I work with data where milliseconds is my saviour when I count distinct the datetime to get number of events. Alteryx ignores the millisecond part (as lots of other BI tool providers - I don't know what is going on with this idea that milliseconds are not needed). Yes I can convert it to string but it's not the best practice to create duplicate fields just so that I have date part for date-related calculation (plotting, time difference) and on the other hand string value for quick and easy counting..

Add the remove or add Prefix or Suffix Feature on the Summary Tool because this is where the prefix is added automatically by the Summary tool, so instead of adding a new select tool after the Summary tool to remove the prefix. why not to embed it with the summary tool it self. 

Working in the accounting department, this has come up too many times now to ignore! 

Would LOVE LOVE LOVE to see a new formula available in the DateTime formula suite that mimics the function of the EOMONTH() formula when working with dates in Excel. 

The beauty of the EOMONTH() formula in Excel is that I can just give it a date, and then tell it how many months in the future or past I would like it to add/subtract... Alternatively, in Alteryx, this can require 2 or 3 nested DateTime functions to arrive at the same answer. 

Example: To find the end of the month 2 months in the future from today's date, I would use the following formula...

Excel = EOMONTH(Today(),2)

Alteryx = DateTimeAdd(DateTimeAdd(DateTimeTrim(DateTimeToday(),"month"),3,"months"),-1,"days")

Seems much more complicated than it needs to be in Alteryx, and easy to get lost in the nested formulas & non-intuitive adding/subtracting of months/days! I can see a new formula (something like DateTimeEOMonth?) being structured as follows in Alteryx: DateTimeEOMonth([Field],increment)

Please consider! Our accounting department thanks you heartily in advance... 🙂

Cheers,

NJ

This request is super simple!  I love how Alteryx displays the row count and size of the data passing through each tool at run time.  Can you set the default formatting for the row count indicators to be #,###?  Without the commas, it's hard to easily check the row count once you get more than 6-9 digits.

In the example below, it would be so much more readable if it displayed as 75,640,320.