Alteryx Designer Desktop Ideas

Hello all,

Apache Doris ( https://doris.apache.org/ ) is a modern datawarehouse with a lot of ambitions. It's probably the next big thing.

You can read the full doc here https://doris.apache.org/docs/get-starting/what-is-apache-doris but to sum it up, it aims to be THE reference solution for OLAP by claiming even better performance than Clickhouse, DuckDB or MonetDB. Even benchmarks from the Clickhouse team seem to agree.

Best regards,

Simon

Hello

Cartesian product is a common issue when joining dataset with a bad key. What I suggest is an option to check if there will be a cartesian product on the join tool.

-there is a label "Cartesian product (non join key uniqueness) detection"
-under it a drop down menu with three choices
-do nothing
-fail
-warning

Algo :
if do nothing==> well... do nothing more than actual behaviour.
if "fail" or "warning" : count distinct of join key versus count row on each side of the join. If none is unique, display a warning or an error message.

Best regards,

Simon

Allow users the ability to add a delay on the connection between Control Container tools. I frequently have to rerun workflows that use the control container because the workflow has not registered that the file was properly closed on outputting from one output tool to the next. The network drives haven't resolved and show that the file is still open while its moved on to the next control container. Users should have an option in the Configuration screen to add a delay before a signal is sent for the next container to run. 

In the past I was able to use a CReW tool (Wait a Second) in conjunction with the Block Until Done tool to add the delay in manually. But I have since converted all of my workflows over to Control Containers. Since then half of the times the workflow has run I encounter the following errors.

The basic premise is this: 

Phantom spacing. Basically something that looks like it has spaces on Excel but is actually formatted as an indentation. 

Unfortunately, to read the indentation we will need either a VBA prep or read the XML inside. The latter of which is difficult. 

As to VBA, the general steps are to create an indentation formula in order to see the numbers, then go from there. The idea is credited to @clmc9601 as we discussed privately.

As of now, I do not see anyway to do this on Alteryx as a function or even expression. It would be very helpful especially reading trial balances or even Bloomberg outputs as they are formatted with indentation. 

Reading indentation from Excel or any other file within Alteryx will be much appreciated, especially in actuarial and finance spaces. 

Hello all,

As of now, you have two very distinct kinds of connection :

-in memory alias

-in database alias

It happens than every single time I use a in-database alias I have to create the same for in memory since some operations cannot be realized in in-database (such as pre-sql or interface tools)

What does that mean for us :

-more complex settings operations/training/tests

-unefficient worflows that have to deal with two kinds of alias.

What I propose :
-a single "connection alias", that can be used either for in-db either for in-memory,

-one place to configure

-the in-db or in-memory being dependant on the tools you use

Best regards,

Simon

I sometimes have to swap (change the order of) two tools in a flow. It is a bothersome task, especially when there are many connections around them. I would like to suggest two new features for such a situation. It would help if either could be realized.

Swap tools

Select two tools, right-click, and select "Swap" option. 

Move and connect around

Drag a tool holding down Alt key (or something) to move it from the stream and connect around. After that, we can drag and drop the tool to the right place.

Hello all,


As of today, we use the good old alias in-memory to connect to our datasources in in-memory. We have several environments so we use constants in order to change the name of the in-memory alias during execution.

To illustrate :

Depending of the environment, the constant « v_gp_contexte » will take different values :

• GP_DS08_SIDATA for la dev.
• GP_EE_SIDATA for prod.

Sounds nice, right? But now, we would like to use DCM and the nightmare begins :

We can't manually change the name and set the question :

if we look at the xml of the workflow, we only find an id so editing it is useless :

(for informationDCM connections are stored in some sqlite db in C:\Users\{yourname}\AppData\Local\Alteryx

So, I would like to use the DCM inside the in-memory alias (the in-memory alias is stored and can be edited), just like for in-db connection alias.

Best regards,

Simon

In some cases, the information about incoming columns to tools are (temporarily) forgotten, e.g. if Autoconfig is switched off, if the incoming connection is temporarily missing, or if column names are generated dynamically and the workflow has not been executed, yet.

Many tools deal with that situation well, e.g. Selection, Formula, or Summarize. In these cases, the tools tell the user that they cannot find incoming columns, but they preserve the configuration so that the user still can (at least partially) work on these tools and important information on the configuration is not lost:

Example Select Tool

1. First step: Connections present, configuration typed in:
   
2. Second step: Connection cut, confguration opened. The configuration looks screwed up but implicitly contains all settings:
   
3. Third step: Connection re-connected. The configuration is as before:
   

Other tools behave the opposite, for example Unique or Macro Input (an for sure many other tools). If the incoming columns are currently unknown to the Designer and you click once on the symbol, the entire configuration of this tool is lost. You might try to get the configuration back by pressing undo. This, in most cases does not work. Or, even worse, you find out what happened later when it's too late for undo. In this case, you either have an old version of that workflow to look up the configuration or you have to re-develop it. In any case, this is unnecessary and time-consuming software behaviour.

Example Unique Tool

1. Step 1: Connections present, configuration typed in:
    
2. Step 2: Connection cut, confguration opened. The configuration is empty:
   
3. Step 3: Connection re-connected: The entire configuration is permanently lost:
   

I wasn't sure whether I should report this as a bug or a feature enhancement. It is somehow in between. Two aspects tell me that this should be changed:

• Inconsistent behaviour of different tools for now reason,
• Easy loss of programming work, resulting in time-consuming bug fixing.

Please make sure that all tools preserve their configuration also if information on incoming columns is temporarily lost.

Hello all,

We all have experienced these last years the now famous concept of hide/unhide password :
Here a few examples of it

I would like this exact principle everywhere we have a password on Alteryx.

Best regards,

Simon

Hi everyone,

Add two additional features to a directory tool. Something like this:

Use cases:

1. Since it is not possible to use a folder browse on the Gallery, this could help a basic user create a list of possible folders to select from with the help of a drop-down

2. Directory analysis for cleaning purposes - currently, if you want to get a list of the folders with Alteryx, it takes forever for big file servers since Alteryx is mapping all the files

Both are achievable today through regex or a bat script.

Thank you,

Fernando Vizcaino

Right now, the List Box interface tool allows end users to select multiple options of fields for selections, filtering, and formatting/formulating. 

However, it doesn't do quite as good when a use case has over 1,000+ columns/fields. This is made even more complicated with each column/field having somewhat similar naming conventions thereby causing confusion. 

Having a search function, as made available in standard Select Tools, Join tools, and other tools that has filtering capacity, will be most helpful for developers to give maximum flexibility to end users.

Hello all,

Here the issue : I have a workflow in my One Drive folder



In that workflow, I use a macro that writes a file with a relative path (..\6_Big_Data\EN\.csv ) :




Strangely, it doesn't work and the error message seems to relate to a folder that doesn't exist (but also, not the one I have set)

ErrorLink: Output Data (1): https://community.alteryx.com/t5/*/*/ta-p/724327?utm_source=designer&utm_medium=resultsgrid|Cannot access the folder C:\Users\saubert\OneDrive - Business & Decision\Documents\B&D_Market\6_Big_Data\EN\.

I really would like that to work :)

Best regards,

Simon

Hello all,


As you all know, you can use API with the Alteryx Download tool. However, this tool is not that easy to configure.
On the other hand, the API world use a lot tools such as Postman  or Bruno (an open source clone) which allows easy test, debug... I use it everytime I had to work on a rest API and then I try to translate it to the final tool (such as the Alteryx Download tool). Both tools offer "collection", a set of request, and also environment configuration. Here are some examples on the project I'm working on :

And you can even get some code



I would like to leverage those collections in my download tool configuration, that would be quite easier to use !

Best regards,

Simon

Is it possible to add sort functionality to the Sample tool in Designer, similar to the 'Sample Based on Order' functionality in the Sample tool in Designer Cloud? This would cut down on the Sort + Sample tool combo in Designer!

Thanks!

Today, there is an checkbox to "Disable All Tools that Write Output" within the Runtime settings for a workflow.  Setting this option requires at least 3 clicks:

• Click on the canvas
• Click the "Runtime" tab in the Configuration pane
• Click the checkbox

Could a keyboard shortcut be added for this?  I've spoken to several users who leverage this feature and, while it is already a time saver, it seems helpful enough where a keyboard shortcut is warranted.

The Find Replace tool has a checkbox to do a case insensitive find. It would be fabulous if the Join and Join Multiple tools had a similar checkbox.

I frequently have to create a new field in each data stream, convert the data I want to join on to upper case, perform the join and remove the extra "helper" fields. Using the helper field is needed in my case in order to preserve unique capitalization (i.e., acronyms within the string, etc.). 

Hello all,

Sometimes, when you have too much time to retrieve your tables metadas, you can have this message

Initialization Timed Out: Workflow must be run for field meta info to be accurate.

From what I understand, it's Alteryx and the source system that drives the time out value. However, I have some cases where the long time is "normal" and that really hurts the user experience.
So, I would like the ability in settings to change the default value.

Best regards,

Simon

Hello all,

According to wikipedia https://en.wikipedia.org/wiki/Materialized_view

 In computing, a materialized view is a database object that contains the results of a query. For example, it may be a local copy of data located remotely, or may be a subset of the rows and/or columns of a table or join result, or may be a summary using an aggregate function.

The process of setting up a materialized view is sometimes called materialization.[1] This is a form of caching the results of a query, similar to memoization of the value of a function in functional languages, and it is sometimes described as a form of precomputation.[2][3] As with other forms of precomputation, database users typically use materialized views for performance reasons, i.e. as a form of optimization.

So, I would like to create that in Alteryx, for obvious performance reasons in some use cases.

This is not a duplicate of https://community.alteryx.com/t5/Alteryx-Designer-Desktop-Ideas/In-DB-Create-View/idi-p/157886

Best regards,

Simon