Alteryx Designer Desktop Ideas

These windows when pulled out as stand-alone windows are free floating, able to be placed anywhere on any screen you have connected.

If one of these screens gets disconnected those windows don't change position. So if your monitors die or go away for some reason there is no way to get them back unless you get a second monitor.

I propose you change the coding to where when a window is re-enabled it always shows up at position [0,0] on monitor 1.

Very frustrating.

Products Team: Could you tell me if this is on the future road map or not?

It's something that other software does utilize, and I've seen similar requests on this message board.

Many companies use per period, quarter, year, etc. that aren't equal lengths or same days each month.

By saying every 364 days, you can schedule a yearly report. If your 4 quarters are unequal length, you can schedule 4 times (1st day of each quarter) at 364 days, recurring.

We have lengths of every 28 days for monthly reports (not 30/31). Or every 90 days. Or 180 days. Or every 14 days.

Being able to Schedule Every N Days moves you from owning a scheduler, to a providing a Competitive Scheduler.

I'm a brand new user to Alteryx. I have Designer + Scheduler. I had read about the advantages of MongoDB. I went into the Scheduler System Settings and changed it to MongoDB to find that the service didn't start, among other issues. 

Come to find out, MongoDB is not supported for Scheduler-only installs/licenses. 

Therefore, I believe that the option to change the db storage for scheduler-only installs should be disabled. 

I would like the functionality to configure my own installation media for my companies environment. For example, I want send new users to a link where they can install Alteryx designer that automatically turns on phone home data with our gallery information and installs any company wide macros that are relevant for the users. Then I would like to be able to push any periodic updates to all the designers in our company. For example, if Alteryx comes out with a new version that I want to deploy or if I come out with new macros that I want to deploy I can deploy across all users easily from the server. Obviously the ability to roll back updates would be needed as well.   

When saving an alteryx module (yxmd, yxmc, yxwz, yxzp), can we have a simple "SAVE AS" function that allows us to choose the version number?  Conversely, could we open a newer version module with a warning message rather than an error?

In either case there would be the logical CAVEAT that certain functions or features may not be compatible with the save/open function.

Thanks,

Mark

Currently Alteryx Designer Custom schedule window only support specifying 1 hour. I would like to request it be changed to Hours of the Day with checkboxes from 0 to 23, similar to Days of the Month.

Given the prevalence of XML - it seems that it's worth adding a native XML capability to Alterxy (similar to the discussion with @CharleyMcGee and  @KaneG in the discussion forum).    Currently XML is treated mostly like a big and oddly behaved text field, which really undermines the usefulness of XML in real applications.

What I'm thinking is:

- Add in a component, which acts like a join, but what it does is validates an XML file vs. an XSD file so that you can see if your XML file matches the schema definition.   Tremendously useful if you've ever had to hand-craft XML.

- Add in a native data-type for XML (like you have a data-type for Centroids)

- On this XML data type - you can then do interesting things like walk the document object model, or iterate through all children (which fixes the issue of deeply nested XML being such a pain).     This would bring XML parsing into the level of usefulness that programmers in Java & Visual Studio have enjoyed for years

- Finally - an ability to construct XML data files without having to text-hack this.   i.e. something similar to the transpose tool, where for a given node, you can add children etc.

These four things would really really assist with getting Alteryx to be able to deal with modern data sets like JSON; XML and even web-page scrubbing.

As always - very happy to commit time to helping shape this - please feel free to reach out if that would be useful.

Thank you all

Sean

CC: @JoeM; @mceleavey; @MarqueeCrew; @NeilR; @Ned; @dawid_nawrot; @TaraM; @GeneR

If possible, it would be very helpful if the Schedule Workflow window that a user activates to schedule a workflow on the server showed which version is currently running on the server. This will help avoid the version incompatibility issues when a user has upgraded to a higher version than is currently running on the server. Also, for companies that have just started using a server and all the version control processes and guidelines and not yet in place this would be very helpful. Thanks for the consideration. 

 Hi!

I opened up WorkflowA and WorkflowB.  Later, I went to Windows Explorer, and clicked open WorkflowA, because I wanted to make another change in it.  Not realizing that it was already open, I inadvertently forked WorkflowA into two versions.

It is desireable to be able to open a workflow twice.  Say, I made several changes and wanted to compare that to the original. However, it would be nice if Alteryx produced a warning saying that the workflow has already been opened.  In my case, WorkflowA was pretty complicated, and I don't know if I "un-forked" the workflow correctly.  A notice would have prevented this scenario, which has happened to me multiple times.

Thank you,

Joe Kelly

Whenever I add an interface tool, it adds a constant just like the 4 engine constants and any user constants. It would be useful if tools like the formula and filter automatically added question constants to the list for you to use. This would be identical to how user constants behave currently. Here is the before and after for visual effect:

BEFORE:

AFTER:

Right now we can only change the alteryx log folder but not the log file name. If we can change the log file name , it will be great because that gives us the ability to parse certain logs and check for errors/issues and send out emails accordingly.

Frequently with more complicated tool configurations I end up having to setup certain elements over and over again.  Would be great to have a one click "use this as the default" configuration that would follow my profile and apply to all future drags of that tool onto the workflow.  Configuration elements that depend on the input fields would not be impacted.

Also an apply all feature to apply the similar configuration elements to all tools of the same tool type.

Example Configuration Elements

Comment Tool - Shape, Font, text Color, Background Color, Alignment...

Tool Container - Text Color, fill color , border color, transparency, margin

Table Tool - Default Table Settings

Union Tool - "Auto config by name", Actions when fields differ

Data Clensing - all configuration elements

Sample - all configuration elements

In Dec I had an issue where I could not uninstall or upgrade Alteryx. As part of troubleshooting and the eventual solution I had to manually delete any registry key related to Alteryx. As these were hundreds of entries this took a long time. It would be handy if Alteryx could provide a tool that cleaned the registry of all Alteryx related entries. Related: "Case 00088264: Unable to uninstall Alteryx"

I have the Show Properties Window selected, but it is not showing up on my screen. At first I thought it was just hidden and that I could just pull it back from being hidden, but I can't find it anywhere. 

Thanks! 

I have several modules that need to run in sequence.   Can a ksh or some other program be used to string the modules together?  

So that if I have Step1.yxmd, Step2.yxmd and Step3.yxmd.  2 is dependent on 1, 3 is dependent on 2.  I want to tell it the jobs to run and then to wait until that module completes, then run the next.  


run Step1.yxmd
Wait

run Step2.yxmd
Wait

run Step3.yxmd
Wait


Or, if I have a group of modules that can run concurrently but subsequent jobs are dependent on all of them to finish, i can let all those jobs run and have the next step wait for those to complete to begin.  

run Step1A.yxmd
run Step1B.yxmd
run Step1C.yxmd
run Step1D.yxmd
Wait

run Step2.yxmd
Wait

run Step3.yxmd
Wait


I know this is very simplistic, but hoping it shows the need.  Also, we do have the scheduler set up to use, so if there is a way to set dependencies between modules within Scheduler, that might be helpful.  Just haven't found anything.  

Thanks!

I just upgraded to the new Alteryx 8.6 which I'm looking forward to using, however, it is quite frustrating that none of my customized user settings are maintained during the install process. I make a few customizations:

• Vertical layout
• Showing the grid and the XML
• Turning off the "module complete" pop-up
• My 'panes' where I put them
• A few favorite tools in the "Favorites" toolbar

And there are so many other customizations that I don't go near (but might if they were maintained during upgrade), like:

• Default temporary path and Logging
• Dataset defaults
• Zoom levels
• Startup page & Distance units

Please implement a way of maintaining these settings!!