Advent of Code is back! Unwrap daily challenges to sharpen your Alteryx skills and earn badges along the way! Learn more now.
Free Trial

Alteryx Designer Desktop Ideas

Share your Designer Desktop product ideas - we're listening!
Submitting an Idea?

Be sure to review our Idea Submission Guidelines for more information!

Submission Guidelines

Featured Ideas

0 Likes

I would like to be able to have the Map Tool to change the Reference Base Map to Tom Tom CA if there is a Country column in the incoming data stream that reads "CAN".  Or change the Expand Extent from the default 10(%) to the number that's in a column called "Extent".

 

Right now I can only do it using the Macro interface tool, but I still have to make my selection after I select which data point(s) I'm using.

 

I want it to generate specific-format maps based on the input data I provide, so it could run automatically.

 

I guess, aside from the Spatial Field, Grouping Field, Thematic Field, and Label Fields, I'd love a Configurations Field(s).

0 Likes

I would like to see an included select window for (nearly) all tools. Sometimes almost half of my workflow are select tools because I try to minimize my data and improve naming as much as possible.

 

Example:

select_tools.PNG

 

1) Removing unnecessary columns

2) Removing Lat/Long columns

3) Removing not needed columns from distance tool.

 

Another example would be the typical usage of cross-tab. In 90% of my cross-tab usage, I put a select tool behind it.

 

I think it would be good to have an included select window in nearly all tools. There are probably tools that don't need them, but I think it would be a good addition to many tools.

 

I would suggest to add an included select tool for (at least) these tools:

- Input Data

- Cross-tab

- Tile

- Formula

- Multi-Row Formula

- Multi-Field Formula

- Text To Columns

- Cross Tab

- Transpose

- Create Points

- Distance

- Trade Area

- ... 

 

0 Likes

amcghee6_0-1580399446000.png

For example, allowing the letters in front of the column titles to be formatted differently to make them stand out on a report. 

0 Likes

When using the equal sum option in the Tile tool, you have the choice to sort by a column. However, it's not clear from the tool whether the data is being sorted in ascending or descending order.

 

Confusingly, the data is sorted in descending order, compared to the default of ascending in the Sort tool. This seems counterintuitive, as a user would expect the same defaults across tools (we did! and it caused some consternation when we worked out it wasn't) and also because in most of our use cases, you want the highest tile to be the highest rank, e.g., if you were sorting households by income.

 

I have two possible suggestions:

     1. Update the tool properties so that it reads "Sort column (descending)". (Probably the easiest change!)

     2. Allow the user to specify a direction with another drop down that becomes active when you select a sort field (similar to the sort tool).

 

I know that the functionality of suggestion 2 is available by adding a Sort tool before the Tile and sorting the data in ascending order. However, having to do that every time seems to defeat the point of being able to sort in the Tile tool.

 

Thanks for reading!

Jason

 

Standard Tile configuration:

Tile_EqualSum.png

 

Option 1 (mock-up):

Tile_EqualSum-Desc.png

 

Option 2 (mock-up):

Tile_EqualSum-SortOrder.png

 

0 Likes

Hello,

I am using google analytics connector (v7.0.7) with alteryx  designer version 2019.4. I am using online option to sign in and able to extract required dimensions and metrics but when it gets disconnected, I have to select everything again.

That would be very helpful if  I can simply save my settings with selected dimensions, metrics and segments etc.

Thanks 

0 Likes

I would love to see an optional output anker for the render tool.

 

This would allow us to push a pdf/png into the python module. We could then build twitter/social media 'add ons' using python and fully automize the process.

0 Likes

Hi 

1:
I'm from Denmark, and like several other european countries we use commas instead of dot as decimal seperator. And we use dot as thousand seperator.

So if im working in a flow with loads of price fields, lets say cost price, amount per unit, amount and amount including vat i need to do a multi field replace. Else I dont get the output i can work with in excel or other programs.

So it would be great beeing able to set seperators on a flow level, like you can in excel when importing.

2.
Beeing able to set a date format on a flow level.
Lets say my input data is 12.12.2019 and i need 2019-12-12 in my output. If i work with several different date fields i need to use several datetime fields.
Alternate could be a multi field datetime ? 

 

3.
Having a search function when using the select ? And maybe a numbers order.

So if i scroll down, i could enter 3 - which means this would now be my 3. shown field? 

0 Likes

A great feature would be for CASS to provide the address type as Residential or Business.  Better yet, further breakdown of address type into single-family, apartment, retail, office, commercial, warehouse, etc.  This would be very beneficial when analyzing address data from the Tom Tom Address Points Calgary database and can allow a end-user to filter prioritize addresses in their analysis based on the type of address.

0 Likes

The performance profile option outputs a list into the results window. It is difficult to check the tools and continuously scan back to the profile. Make it easy! Put the times and percentages in the connection progress tooltips of all the tools.

0 Likes

Hi Team,

 

For a small workflow the current setup is okay to handle but with big workflow where input file count comes 25 at multiple locations then it is difficult to check every input.

 

The idea is: There should be some mechanism to check input/output before running the complete workflow 

 

  • If any of the input file is locked then ask user to continue or not
  • If any output file is locked then ask user to continue or not
  • Or above this message can be combined together

Once this done the workflow can do further processing.

 

From my experience, this will help to improve work process and time to fix the issue.

 

Ashis Sanpui

0 Likes

Can we have an Alteryx environment that is like a free sandbox similar in nature to Tableau's Tableau Public? It will really help people wanting to get Alteryx certified prepare for certifications without paying the expensive AUD7,795. Please help the jobseekers who would like to pick up Alteryx but cannot afford your hefty price tag just yet.

0 Likes

Dummy/garbage text is required in the "Write to file or database" field to be able to write files from fullpaths using the "Take File Table name from field" check box and dropdown (also horrible UX/UI IMO). Without which you get a uninformative "Cannot access the folder" error message.

 

This isn't obvious and makes no sense and should not be required. The User experience here is very unintuitive, can you review this component?

0 Likes

I'm really struggling with the documentation/examples and the UX around node configuration. I often will spend an hour or more trying to solve really basic issues despite looking at the examples.

 

Sifting through relevant threads on the forum is a chore.

 

A link to a subforum or even better a wiki subtopic would be helpful, placed beside the Open Example link in the top ribbon.

 

eg

 

subforum.jpg

 

0 Likes

I love the ability to setup the UI with the different windows (results, config etc) in the places that I want. However, once I have them setup I generally don't want to move the positions much again, resize windows in place, yes, but not move them all together.

 

I would love the ability to lock the window configuration in place so accidental drags on a title bar doesn't move the windows stay in place. I still want to be able to resize those windows in the space though.

 

Cheers

0 Likes

Hello Alteryx Dev Gurus - 

 

I made an event to email me when there was an error at run time.  But I did not populate the 'To' field.  (I know!)  The process borked soft and shows as an error in the results queue when a customer noticed there was no data.  This is one of the simple ones.  

 

Thanks!

 

 

0 Likes

I still see that companies are expecting BI professionals to write SQL queries manually despite Alteryx giving complete solution. Idea is to spread value add of Alteryx in Indian market and global companies

0 Likes

When reading a SharePoint list with the Input Tool, it does not bring in any columns that are set as "Managed Metadata". Can the tool be updated to include these?

0 Likes

I am using 2 or 3 displays set up to be more productive with most of my work. If only we can have snap-on features in Alteryx that support for the windows to be able to snap on multiple displays, not just floating. 

 

The problem with floating windows is they are not correctly aligned for the full-frame and some require custom resizing. to make it worse, some floating windows interchange in their resolution due to multiple resolutions of the display and the non-snap floating windows (configuration, results etc.)

0 Likes

While there are ways to accomplish using multiple tools, it should be a pre-setting within the dynamic input.

0 Likes

Default setting should be TopLeft vs TopCenter for Comment Tool.  If you have 10 comment boxes in a workflow: 9 will be comments or instructions or notes and will be TopLeft and one will be the Title and it will be Center.  I always find myself having to change to TopLeft or Center.  TopCentered instructions, notes and comments can be hard to read.

Top Liked Authors