Alteryx Designer Desktop Ideas

I'm Left handed and use my mouse in my left hand.  As such I use the following right-hand keyboard operations in the programs like Excel etc; CTRL-INS (Copy), Shift-INS (Paste), and Shift-DEL (Cut).

In Alteryx Designer these don't work for me in the Workflow window (but do in say the meta Info window) - is there a setting so I can enable them for the Workflow Window, or can the feature be added.

So there's a shortcut for running a workflow but for the life of me I can't seem to find a shortcut for running a workflow as an analytic app.  Surely there should be one? 

Ctrl + Shift + R seems like an obvious choice.

Shifty

Sometimes, when you change the system settings on Alteryx Designer, you get this annoying message :

Error: "Settings Validation Error" Alteryx Service failed to initialize, likely due to inconsistent RuntimeSettings.xml file: Unable to start Queue service, insufficient license

well, well, well...

I found the solution to this page https://community.alteryx.com/t5/Alteryx-Designer-Knowledge-Base/Settings-Validation-Error-when-usin...

"Under Environment Setup Type, you must select "Designer Only" if only Designer is licensed"


Maybe instead of the current message, Alteryx can check the licence and help with a "you must choose Designer only option ath the beginning because only Designer is licensed".

Best regards,

Simon

Hello!
I have recently come across something within Alteryx that caught me by surprise. Currently when you are within the configuration window of a tool (in this example, the browse tool) and use ctrl + backspace (shortcut for deleting a previous full word), a blank character is instead added.

Please see example:

Currently in the Browse tool configuration

Go to change the Name of the tool - and naturally to clear it, use ctrl + backspace:

[] is added to the end. From what i can gather, this is a 'control character' , used when an application does not support ctrl+backspace.

Ctrl + Delete however, is supported.

I am proposing for this character/functionality to be supported. I believe the configuration window is the main - and potentially only, i couldn't find any other examples - place this is not supported.

Hope this makes sense!
TheOC

Adding "Lightning Bolt" connectors to the standard workflow tools to allow dynamic automation of the settings would be a game changer. I believe that this would enable us to create universally dynamic and adaptive workflows which could be used as drop in solutions for most datasets. This would turn the standard tools into a dynamic ones and dramatically reduce the tool count to accomplish dynamic tasks, and make complex workflows much easier to internalize. Making standard workflow tools more dynamic would allow us to easily dynamically incorporate conditional tests / values / fieldname selections / bypass / etc into tools like detour / filter / formula / unique / transpose / crosstab / summarize / Outputs / etc. I would also like to see the ability to utilize a bool field to bypass any given tool in a workflow. That way we could do things like conditionally bypass an entire formula tool which would dramatically simplify complex formula construction, turn on and off inputs / outputs, simplify error avoidance, etc.

In order to build complex dynamic conditional workflows with the current tool capabilities, most of us are forced to use custom macros (often a multitude of workflow specific ones as well), constantly add and remove formula created fields for message relay, and create complex multi-routings / tests / unions in a standard workflow with large numbers of tools and containers. This hides many of our tasks within short-term use fields / custom macros and it makes the rest of our workflows voluminous and less intuitive.

On the User Interface side, I recommend a simple approach. Next to the standard tool setting there should be a dynamic input option which allows you to select the source field in the lightning bolt connector. Next to that, there should be an icon that can be clicked on to pop up a short text description and a basic screen shot of data in the correct format for dynamic input. I would also like to see a check box at the bottom for manual tool "bypass" which can also be dynamically controlled. (This would especially be helpful on outputs, but it would also be helpful to allow formulas and filters to be kept in place for future use even when they should not currently be used) Turned off tools could be highlighted in a red background or something.

This would be useful for anyone creating dynamic and adaptive workflows, but it would especially expand Alteryx Designer's capability to attract more custom software developers like me.  It would dramatically reduce the need for a large number of complex workflow specific macros that clutter our systems. Users that find the traditional workflow tool approach easier for them could easily use the tools as normal by simply using the standard manual settings. Advanced users could simplify the creation of universally dynamic and self adaptive workflows.

The SQL compiler within the Input Tool places a space between operators causing a SQL syntax error.

Eg.

SELECT * FROM [DataSource] WHERE [Dimension] != 'abc'

Becomes

SELECT * FROM [DataSource] WHERE [Dimension] ! = 'abc'

The compiler should not add a space in this instance as it violates the syntax rules and triggers an error.

With all the talk of #TeamVertical and #TeamHorizonal an idea emerged for diagonal orientation. Now, it's a funny idea at first glance, but actually having the ability to control the general organization of a workflow could be very helpful. Imagine if there was a dot or arrow like in word that would enable us to tilt the canvas to fit our screens better. Like below, but leaving the text horizontal.

This solves the problem with the Left Join anchors moving to the top and instead allows anyone to rotate their workflow to what fits the case.

Thanks!!

#Team45Degrees

Issue:

Oftentimes when a workflow has an error, the error message is very long and is difficult to read in the results window. Currently, if you hover over the error message in the results window, the error message will popout but only for a couple seconds. Reading the error messages is a crucial step in troubleshooting the issue with a workflow, however, with the current experience it becomes very difficult to read the entire error message prior to the popout expiring.

Solution:

Simply double clicking any message, especially an error message, in the results window should have a permanent popout window presented to the user. This message window will allow the user to scroll down to read the entire message (if lengthy), popout the window further, minimize the window, and exit the window entirely. 

All,

I'd like to be able to disable the notification to update Alteryx toward the top of the screen.  The longest choice is only one year...I'd like to turn it off forever, since we control versions used internally and it is driven by the server version.

Folks are updating their software when they shouldn't and causing issues for each other.

Thanks for any advice.

File has a different Schema than the first file in the set- This is error received in Dynamic Input Tool, when there is change in data type any column in the file.  My File has a column Which comes in " V String" Data type but suddenly it comes in " Double" then this error will come.

Tool should ignore this error and consider incoming data in a data type defined while in configuration, so request to provide feature to configure data type in Dynamic Input Tool.

Hello Alteryx,

Would it be possible to extend the "Cache and Run" functionality also to tools with multiple outputs? Our clients use the R and Python tools very frequently and the runtimes tend to be pretty long. For the development purposes, it would be great to have the caching possibilities also on these tools.

Thank you very much for considering this idea.

Regards,

Jan Laznicka

Hello,

It's nice to have this OpenAI Connector but it seems it must be the default OpenAI URL. In my company, we use OpenAI on an Azure instance and I'm unable to connect to it.

(by the way, I know pre-sales teams have developed lot of connectors for fireworks, mistral, etc.. it would be very cool to have it available).

Best regards,

Simon

Add Unicode category to the cleansing tool

Sometimes, Control Containers produce error messages even if they are deactivated by feeding an empty table into their input connection.

(Note that this is a made up example of something which can happen if input tables might be from different sources and have different columns so that they need separated treatment.)

According to the product team, this is expected behaviour since a selection does not allow zero columns selected. This might be true (which I doubt a bit), but it is at least counter-intuitive. If this behaviour cannot be avoided in total, I have a proposal which would improve the user experience without changing the entire workflow validation logic.

(The support engineer understands the point and has raised a defect.)

Instead of writing messages inside Control Containers directly to the log output (on screen, in logfile) and to mark the workflow as erroneous, I propose to introduce a message (message, warning, error) stack for tools inside Control Containers:

1. When the configuration validation is executed:
1. Messages (messages, warnings, errors) produced outside of Control Containers are output to the screen log and to the log files (as today).
2. Messages (messages, warning, errors) produced inside of Control Containers are not yet output but stored in a message stack.
2. At the moment when it is decided whether a Control container is activated or deactivated:
1. If Control Container activated: Write the previously stored message stack for this Control Container to the screen and to the log output, and increase error and warning counts accordingly.
2. If Control Container deactivated: Delete the message stack for this Control Container (w/o reporting anything to the log and w/o increasing error and warning count).

This would result in a different sequence of messages than today (because everything inside activated Control Containers would be reported later than today). Since there’s no logical order of messages anyways, this would not matter. And it would avoid the apparently illogical case that deactivated Control Containers produce errors.

Currently when debug mode is entered in analytic apps and macros, the direct inputs to the app/macro when the error occurred are hardcoded into a workflow in debug mode, so that errors can be more easily detected.

However, inputs into analytic apps also create global variables which can be used in the more code-heavy aspects of Alteryx such as the Formula Tool. These are not updated in the same way which can cause workflows to break in debug mode - it would be really helpful if global variables could be updated in the same way as the inputs into tools are.

Would be nice to have a way to cache-uncache all inputs or a selected group of tools.  Caching and Uncaching workflows with many input tools or slow data-read tools gets to be a bit cumbersome.  Would be a nice QoL improvement :)

I looked around for something like this but didn't see a solution, so thought I'd recommend.  Please let me know if something like this exists already natively in designer desktop.

Hi there,

When you connect to a DB using a connection string or an alias - this shows up in the Workflow Dependancies in a way that is very useful to allow you to identify impacts if a DB is moved or migrated.

However - in 2023.1, if you use DCM then the database dependancies just show up as .\ which makes dependancy management much more difficult.

Please could you add the capability to view the DCM dependancies correctly in the dependancy window?

BTW - this workflow Dependancy Window would be a great place to build a simple process to move existing DB connections to a DCM connection!

CC: @wesley-siu @_PavelP 

Alteryx is not able to read generated Excel sheets which have the prefix "x:" within it's XML tags.  Often this occurs when an xlsx file is created from a bot or rpa process.  Example file attached.