Advent of Code is back! Unwrap daily challenges to sharpen your Alteryx skills and earn badges along the way! Learn more now.
Free Trial

Alteryx Designer Desktop Ideas

Share your Designer Desktop product ideas - we're listening!
Submitting an Idea?

Be sure to review our Idea Submission Guidelines for more information!

Submission Guidelines

Featured Ideas

0 Likes

Alteryx current C5 implementation requires very carefully crafted data to work.

This is fine in an academic environment, however production datasets are rarely available with such low level of tolerances.

 

Competing products have implementations that will not fail as easily and Alteryx doesn't have any other multi-way decision tree option.

A good alternative would be otherwise a tool that does some dataset diagnostic so that we at least can know where the problem is without having days of data scientist time to comb the dataset.

 

Thank you,

Marco

0 Likes

Using Email tool, you are not able to send email via SMTP server that uses STARTTLS protocol and self-signed certificate for completing the handshake between the client and the server. You face an error:

unnamed.png

 

This is due to the fact that the Alteryx Designer SMTP client uses cURL and it does not read the Microsoft cert store, but instead looks at a specific .pem file listed in the installation directory: {AlteryxInstall}\bin\RuntimeData\Certificates\cacert.pem

 

I would really appreciate if Alteryx Designer will be able to look into the Microsoft certificates store so that it should be able to use self-signed certificates available there.

Self-signed certificates are often use in the companies in order to get more secures their own communications.

Thanks

 

please refer to the case #00447188 for more details

0 Likes

Can we have string function that parse the string between 2 indices?

As FindString can find particular string occurrence,we can easily get required part of string easily from that index till required index.

or If we want entire remaining string we can have a function like:

Substring(String,StartIndex,EndIndex) Where endIndex can be : Length(String)-1

 

 

0 Likes

The ARIMA tool provides a ton of valuable information with just a small amount of effort.  And the "I" anchor efficiently outputs test results to evaluate the effectiveness of the model.

 

Annoyingly, in the Browse tool off the "I" anchor, test definitions such as MPE/MAPE/MASE cannot be read when hovering without widening the Configuration window beyond the chart above.   Definitions have a wider range than the chart itself.  The user has to manually widen and then subsequently unwiden the Configuration window to read.

 

Idea would be for the tooltips when hovering to be as wide as the chart above.  That would avoid repetitive resizing of the Configuration window.

 

Capture.PNG

0 Likes

Upper management do not get to be part of the workflow build. When presenting the final product to them as the current solution in pdf print, they complain about the size and the legibility of the workflow. I propose that Alteryx Team could do some enhancement about this feature where large workflows can be automatically printed  with minimal effort where the containers would not break in halves or at ends. It does look confusing for someone who has never seen the workflow before or know what it does. Currently, if we change the settings to any format and any settings, you do see some containers that break and continues on the following page. However, best practice would be to print any workflow without doing a lot of manipulation in the settings and all have few or every container(s) printed on different page(s).

 

I hope my explanation above made sense to what the ultimate solution should look like. Thanks!

0 Likes

When I bring up the quick menu (right-click) on a tool, under Zoom it lists all the tools to be able to go to quickly. What would be nice to see is a section of connected tools which would show which tools are connected to the tool you just right-clicked on.

0 Likes

Hello --

 

Not sure if this is possible right now, but here is my use case. I have a file with sensitive data that is not saved in a share drive, but in a personal home drive so only I have access to it.

 

At this point, I can run a workflow that requires the file -- but I have access to my home drive -- which other uses would not. I want others to be able to run the workflow -- so, you know, when I win the lottery workflows can go on.

 

I know I can lock a macro. However, if there is an input file in that macro, the user there is still a dependency on having access to where that file is stored.

 

What would be nice is if there were an option to embed the entire file within the workflow (macro) which could then be locked. The data could be prepared from within the macro only outputting the desired pieces of information and another user could run the workflow only have access to what comes into the workflow from the output.

 

The owner of the file has a little auditability as they still have an unencrypted version should then need to see what the source data provided looked like.

 

Please let me know if you would like to discuss further.

 

Thanks,

Seth 

0 Likes

Hi Team,

 

It will be great to have a replace all functionality in Alteryx. There are times when we have to change the paths/ field references etc in formulas for a basic WF. The replace all functionality will help replace references in a go.

0 Likes

I have 10 .txt files that I dragged and dropped onto the canvas. I clicked on the first one and set it to read as a delimited text file. I clicked on the second file, set it up, and then the third, and on and on. You can see where this is going. Generally speaking, I can copy some or all of a tool's configuration by grabbing the XML and pasting it into a target tool. This is also an imperfect solution as it can take plenty of editing, see above case, it doesn't contain the annotation, and it is not a solution for beginners.

 

What if I clicked on a given tool, clicked an Import Settings button, and it launched a dialogue box? This dialogue box would ask me to select a tool from the canvas. Once selected, it would let me pick some or all of the configuration settings (include the annotation) and apply them to the current tool. If I clicked on a Select tool, the dialogue box would only show other Select tools, and so on.

 

Again, I know about copying and pasting XML, about editing it, I've even used Sublime to help with the above case. I know about saving Select tool field configurations. i know about saving a formula. I know about copying a tool itself and pasting it elsewhere. These methods have their uses and some apply only to specific tools or situations. This idea transcends them all.

 

Please craft an Import Settings button that is friendly for beginners and experts alike. While we're at it, please also allow exporting and saving settings. That way, I can use them in other workflows later on.

0 Likes

When working within the canvas/properties the mouse is the primary tool and allowing a middle click would be an easy way to initiate the workflow.

 

Currently, middle button can be used for moving in the canvas area (click and hold) and closing it (click on the tab).

0 Likes

It would be nice to have 2 tier tool annotations.  

 

Tier 1 would be akin to an H1 title and serve as a condensed descriptive title the user creates.  

 

Tier 2 would be analogous to the current annotation option and provide a mechanism to provide specific details regarding the operation being performed by a specific tool (relative to the workflow).

 

The default might be to show Tier 1 and hide Tier 2.  A user would have the option to show all Tier 2 annotations or chose to show select Tier 2 annotations (much like the current annotation show/hide options).  An alternative option might be two depict Tier 2 as a hover over tool tip.  

 

Thoughts?

 

  

0 Likes

Designer only shows the current log during execution or the most recently executed log in the wf results pane. Please add a button underneath the hamburger menu that allows the user to see all of the logs of this wf executed during this session, or, even better, associated with this wf for all time. Please.

0 Likes

I would like to share my idea that would be definitely useful for fast automation of the process with reading and correctly recognizing the text from PDF input. I wrote about that, hoping somebody has already thought about that here.

 

The idea is the tools "PDF Input" and "Image to Text" from "Text Mining" category to be improved, so as the text from PDF document to be read properly, no matter the text position on each page. 

 

It could be also considered the performance of the combined tools of "PDF Input" and "Image to Text" to be improved as they work slower than the customized tool PDF Input does.

 

The idea also can be expanded to an entirely new tool that works out all the actions, needed for correctly reading of a PDF document without manual intervention.

0 Likes

Hi All,

 

I had posted in the Tool Master | Unique thread about how when I use this tool it does not preserve my sort.

 

This seems odd to me. I understand that it's "a blocking tool and that records are then sorted prior to executing the tool process" as @TaraM points out. However, in a program where data is explicitly manipulated to a condition, there is an expectation on my side (maybe mistakenly?) that if I sort something that it would not be changed unless stated or indicated in some fashion. 

 

For my use case I was sorting to eliminate the duplicates, then joining that data to eliminate other duplicates and outputting the resultant to my users and future-state will be automatically fed into a system, for each stage it matters that the sort function is kept intact.

 

I know it's a simple complaint / fix, but its unexpected behavior on my end and could mean less confusion and less tools on the board. which is always a good thing in my book.

0 Likes

Wonder if it would be possible to have a set of SQL tools in Alteryx which to the user would look like you are dragging in a tool to manipulate the data (such as filtering data) but in the background it is updating the SQL (such as adding a WHERE clause) meaning the module runs faster. This would be easier than having to manually update the SQL code and would run quicker than bringing all data through and filtering afterwards.

 

I know there is currently the Visual Query Builder, but this is quite fiddly to use so would be good to have something more user-friendly.

0 Likes

While there are many keyboard shortcuts, we primarily interact with the workflow using the mouse. In order to improve efficiencies and easily create saving habits, we should have the ability to Save our progress by right clicking on the workflow tab. Ideally, it should have Save and Save As. 

 

Current:

alatorre_0-1619651116658.png

 

New:

alatorre_2-1619651533300.png

 

 

0 Likes

On the canvas, underneath the Run button, there are zoom out and zoom in buttons. It would be lovely if between them existed a number box indicating the current zoom level of the canvas. This would operate much like my web browser, which typically shows 100% unless I have zoomed in or out. Bonus points if the button is clickable to reset to the default zoom level.

0 Likes

Currently, when sharing a workflow with a Python-based connector such as Google BigQuery, the credentials for the tool have to be reentered if the workflow is opened on a workstation different from where the workflow was created or by a different user on the same workstation. 

There is no need to re-authenticate when publishing a workflow to run by a Server schedule or on the Gallery. This functionality should be extended to sharing the workflow between workstations with the Python registry key enabled.

0 Likes

Hi Team,

 

As the formula design that able to stack multiple formula in once. There should have more things there.

 

1. Error Icon for formula have Error

Can you find which row have error in seconds?

Pang_Hee_Choy_1-1619408302271.png

We had to count to find which formula had error!!!!

and how about now?

Pang_Hee_Choy_2-1619408351228.png

 

At least, do have an icon or anything significant thing that let us found it in second and WITHOUT COUNT!!!

 

2. buttons to expand all/ collapse all.

It was normal that we need to review formula in again in future.

So, you need to click one by by to view all the formulas?

0 Likes

I have 5 containers in my workflow that don't all need to be run every time. I could play the game of manually enabling and disabling them depending on the need that day, but that quickly becomes a hassle with larger workflows. It would be much more efficient to have a functionality somewhere that displays all my containers with a checkbox of which ones I want run and the ability to set the run order I specify so I can make sure my 'Data Pull' container always runs first. An option to select/deselect all containers would be nice to, and maybe the ability to rename my containers much like the select tool does for fields. 

 

Run Selected Containers.PNG

Top Liked Authors