Be sure to review our Idea Submission Guidelines for more information!
Submission GuidelinesHello all,
This may be a little controversial. As of today, when you buy an Alteryx Server, the basic package covers up to 4 cores :
https://community.alteryx.com/t5/Alteryx-Server-Knowledge-Base/How-Alteryx-defines-cores-for-licensing-our-products/ta-p/158030
I have always known that. But these last years, the technology, the world has evolved. Especially the number of cores in a server. As an example, AMD Epyc CPU for server begin at 8 cores :
https://www.amd.com/en/processors/epyc-7002-series
So the idea is to update the number of cores in initial package for 8 or even 16 cores. It would :
-make Alteryx more competitive
-cost only very few money
-end some user frustration
Moreover, Alteryx Server Additional Capacity license should be 4 cores.
Best regards,
Simon
In the example given, there are four scheduled jobs running in the server at the moment and one manual job is being triggered by the user and is in a queued state for more than 30 minutes to start running. However, in MongoDB, when a job is triggered, that time is captured as the start time (not considering the queue time). If we consider the start time of As_Queue in our workflow, we ended up with a mess. Since that manual job is queued for 30 minutes and running for only 3.30 hours, it is being killed by our workflow. It should only be killed after 4 hours.
With Version 2018.3, you removed the Autodetect SMTP button, and with it, have rendered the Email Tool virtually useless for many people, which is a shame because it is a critical tool for some of us to share reports produced in Alteryx.
In requiring an SMTP path, there are a host of authentication issues that need to be addressed, and we can't seem to figure out how to configure the path and From emails properly to allow the tool to work without errors.
My only solution at this point is to rollback to 2018.2 so I can continue to use the Email tool.
Please address this so we can use the tool as before, or provide the necessary configuration options to allow for proper authentication with popular email services (Gmail, etc.)
So you've created your workflow with variable inputs and saved it to the server. Would love to schedule the workflow to run on a recurring basis with saved input values. I.e. single workflow with multiple schedules with different saved values.
I think this may be covered here, is there an update?
My question is, is there a way to see after a job is executed how much memory it consumed in total? Today we have monitoring set at server level that records memory consumption over time but it doesn’t tell which job caused the spike unless we manually go and check list of jobs executed around that time frame. Even with that we cannot know for sure which job is causing the spike.
Today there is no realtime inbuilt job monitoring tool that can answer questions like above.
Hi Alteryx,
Now, under the Job Tab, it is only show the status of running job.
Suggest to add one new page for showing the run history of each workflow/job.
1. Workflow name
2. Priority
3. Assigned Worker
4. Start time
5. End time
6. Duration
7. State
8. Job Type (schedule or manual tracker)
9. Owner
10. Message ( e.g. error log)
Best regards,
Samuel
Hi Alteryx,
The scale of the column width in Alteryx Gallery is fixed.
Sometime may not show the whole word of that column, it is very inconvenience.
Actually, not only in gallery but also in designer. Like the Manage Data Connections pop-up window.
Even in 2019.4, the display problem hasn't been improved.
Can Alteryx improve the UI of gallery and designer asap?
Best Regards,
Samuel To
All of the default values for the RuntimeSettings.xml can be found in the C:\Program Files\Alteryx\bin\RuntimeData\RuntimeSettings.xml.
These values are overridden by the RuntimeSettings.xml file in the ProgramData folder. Unfortunately, there is no “formal” documentation right now.
The suggestion would be to show users the universe of XML tags and their corresponding accepted value configs, and other data related to the XML entity.
Element Name ServiceProviderEntityID -> child of Authentication -> grandchild of SystemSettings
Field | Description |
Definition | This is the URL of the Alteryx Gallery authentication service provider. |
Required | Yes |
Allowed Value Data Type | String |
Allow Multiple Values | No |
XML Example | <ServiceProviderEntityID>https://gallery.alteryx.com/aas</ServiceProviderEntityID></ServiceProviderEntityID> |
Currently, even if Alteryx Server is installed in E drive, RuntimeSettings.xml is generated in C¥programdata¥alteryx. Users cannot replace RuntimeSettings.xml to other folders.
It would be nice if a feature that users can specify place to save RuntimeSettings.xml.
Or, it would be nice if this specification is put in the documentation.
Starting with Windows Sever 2016 edition one could use Docker containers technology on windows environments. My idea is to dynamically convert Designer jobs/workflows to Docker containers at runtime.
When I added data connection on Alteryx Server, there are many unsorted databases. If it is sorted, it is easy to find.
Dearest colleageues and comrades (Romans, countrymen?):
Have you ever queued up your jobs only to have them block your regularly scheduled programming? Imagine a world where, assuming you had multiple worker nodes, you can direct and prioritise your jobs on your terms.
This is what I am suggesting.
I've recently worked with Alteryx support, and they turned me on to a QoS setting in Alteryx Server settings. Peep this like a marshmallow chick in hot pink:
After learning from the great Server Master Kevin Powney (blessed be his name), I learnt that there are currently 3 'channels' that this QoS variable governs. 0 is the highest priority used for workflows. 4 is used for chained apps. 6 is used for gallery service requests.
This will not do.
Why? Well, for one: hello arcane/memorisation.
Secondly, where is my control? I'm a millenial dammit! Service me!
So, my idea, that I want you to vote so highly on as to save yourself any myself a lot of hassle, is to allow a custom QoS variable to be a traffic variable. And here's how it works:
Example time! [cheers, candy thrown]
In my current situation, we have some jobs that are network-intensive (database calls), and jobs that are processing-intensive (CPU hogs doing hard-core maths).
The network-intensive jobs run on the weekends so that we have the data in the morning on Monday. The processing-intensive jobs need to finish, but suck up all the CPU power. For the last couple of weeks, we've unsuccessfully run these jobs over the weekend. The downside is that since we cannot control how traffic flows (and we only have the 0/4/6 options in QoS, of which these only fit in the 0 lane [breath, sorry]) the CPU-heavy jobs have blocked more critical network jobs.
If we had two paths, we could assign the CPU jobs to lane 1 and the network jobs to lane 0 and they can run in parallel. And then my boss is happy. We like happy bosses, right?
Vote this up! My boss is awesome!
Thanks for your ear,
Hail Caesar or something.
-Cedric
Hey Alteryx,
I'm liking the new ability to change the permission for users to schedule, prioritize and assign their work.
I would also like the Permissions to not show if I've turned it off. For most users this feature will not be available and showing a feature they won't be able to use will cause more problems then answers.
Just like in the notification tab, I would like the features that are off not show up in the end users profile tab
It would also be nice if we could assign this to a workflow and not just a person. A more likely scenario is that an App that needs a user input shouldn't be scheduled since it won't work.
To have the ability to turn off the scheduling for just that workflow is more likely then to turn off that feature for an entire person.
Thank you
I think for business purposes it would be great to be able to update the apply for an exemption page that displays when you have a flow that is blocked in safe mode so you could provide accurate documentation to your users about their companies go through an approval process and allowing you to link out to external sites like JIRA to submit a ticket
I'd like the ability to embed my Alteryx Gallery apps into another webpage (Google Sites, etc.). It would be great to see a feature on the gallery to generate this embed code much like how Tableau uses this feature for dashboards.
The WebDAV protocol isn't supported by the Alteryx Scheduler, due to the security constraints associated with connecting to SharePoint. This is a server side limitation that should be aligned with the ability of the desktop to preform the WebDAV action.
The Admin Gallery api needs to have the ability to get questions,execute jobs, get outputs. Currently I can only get questions, execute jobs and get outputs of my private gallery flows, I need to be able to do this for other Artisan flows without having to have their key/secret.
Hello,
I think there should be option to test save data connection during setup and after. Perfectly, if there was possibility to schedule connectivity check, however, just adding option to test it manually will be the step forward.
Best,
Piotr
Hello,
I can't find an option in Alteryx Server wizard to enable redirection from http to https. Alteryx Service occupies both ports so I can't (and I don't want) to deploy a redirection on port 80. Such feature would be really helpful if it comes out of the box.
Best,
Piotr
I would like the ability to add Groups to a collection as well as individual users. This would make things a lot easier for situations where large sets of users needed to be added to a collection at once, or removed at once.
Hello,
Currently, Alteryx server doesn't read multiple files compressed in the zip folder. Here is more information: How to open multiple xml files using Analytical App workflow saved in Alteryx Server
I think this feature is useful for many people.
Sincerely,
knozawa
User | Likes Count |
---|---|
5 | |
2 | |
2 | |
2 | |
2 |