Alteryx Designer Desktop Ideas

Currently the only way to do IF / FOR / WHILE loop is either in Formula tool or via iterative/batch macro.

Instead, it will be hugely useful and a lot more intuitive if there is the ability to build the FOR / WHILE logic embedded in a container (similar to LabVIEW interface https://www.ni.com/en-sg/support/documentation/supplemental/08/labview-for-loops-and-while-loops-exp...).

Advantages include:

- Increased readability. (not having to go into a macro!)

- Increased agility. (more power/ features can be added or modified on the go for something that is more than a Formula tool but not too much interface like a Macro App)

- More intuitive

Dawn.

Hi all!

Based on the title, here's some background information: SHAPLEY Values

Currently, one way of doing so is to utilize the Python tool to write out the script and install the package. However, this will require running Alteryx as an administrator in order to successfully load, test, and run the script. The problem is, a substantial number of companies do not grant such privileges to their Alteryx teams to run as administrator fully as it will always require admin credentials to log in to even open Alteryx after closing it.

I am aware that there is a macro covering SHAP but I've recently tested it and it did not work as intended, plus it covers non-categorical values as determinants only, thereby requiring a conversion of categorical variables into numeric categories or binary categories. 

It will be nice to have a built in Alteryx ML tool that does this analysis and produces a graph akin to a heat map that showcases the values like below:

By doing so, it adds more value to the ML suite and actually helps convince companies to get it.

Otherwise teams will just use Python and be done with it, leaving only Alteryx as the clean-up ETL tool. It leaves much to be desired, and can leave some teams hanging.

I hope for some consideration on this - thank you.

Hello all,

As specified in the title, this idea is to distinguish between Append Prefix/Suffix to File and to Table on the Output Data Tool.


For most files (csv...), the table name does not really exist. However, for at least Excel files, if you choose this option, the result will be one sheet by suffix and the only option to have one file by suffix will be to change entire file path.

Best regards,

Simon

Hello all,

Here the issue : when you have a lot of tables, the Visual Query Builder can be very slow. On my Hive Database, with hundreds of tables, I have the result after 15 minutes and most of the time, it crashes, which is clearly unusable.

I can change the default interface in the Visual Query Builder tool but for changing this setting, I need to load all the tables in the VQB tool.

I would like to set that in User Settings to set it BEFORE opening the Visual Query Builder.

Best regards,

Simon

Allow for setting universal DATA SIZE configuration.  ESPECIALLY on V_WString!!   If you want all your V_WString to be 5096, you can set it. If you want all your fixed decimal values to be 12.4 you can set that.  You can set your own values for a workflow or under advanced setting perhaps you set up your own default values that will be used across all work flows. 

At MINIMUM, change the 1,073,741,823 on V_WString to something semi reasonable. That size won't even fit in a Snowflake table. 

In a similar vein to the forthcoming enhancement of being able to disable a specific output tool, my idea is to have the inverse where you can globally disable all outputs and then enable specific ones only. This should help reduce the number of clicks required/avoid workarounds using containers to obtain this functionality and allow users to be very specific in which outputs run and don't run as required.

Hello all,

As you may know, Alteryx use the Active Query Builder component. However this component itself evolves with cool new features :
https://www.activequerybuilder.com/blog/2018-04-28-much-faster-visual-sql-query-building-in-the-new-...

You can also try the online demo

https://www.activequerybuilder.com/

Best regards,

Simon

Currently : the "Label" element in the Interface Designer Layout View is a single line text input.

Why could it be impoved : the "Label" element is often used to add a block of text in an analytical application interface. And adding a block of text in a single line text input is **staying polite** quite the struggle.

Solution : make this single line text input a text box just like the formula editor.

Hello all,

In help, we can read that :
https://help.alteryx.com/current/designer/write-data-db-tool

Update/Delete is currently only supported for SQL Server ODBC connections.

 I don't know about you but SQL Server is well used in transactional workload but in analytics... well... I have only used once in several dozens of context !

Maybe it would be cool to make it work on many more database?

Best regards,

Simon

Hello,

Enhancement of 'IN' functionality (ie. in Filter tool), so using range instead of citing particular values for example:
instead [ID] IN (1,2,3,52,53,54,100,101,102) something like that [ID] IN (1-3,52-54,100-102).

Checkbox ability to ‘not’ output the original column on a text to columns tool

Currently it's possible to use the Output tool to output to either a sheet, a place in a sheet or a named range in Excel, but it is not possible to output to a preformatted excel table - it would be really good if the output tool had an option to output to [Table1] in an Excel workbook for example. This enhancement would be incredibly helpful for reporting purposes.

Enable files as inputs to Alteryx that have been protected with either Azure Information Protection (AIP) or Microsoft Information Protection (MIP)

From: Alteryx Support <support@alteryx.com>
Sent: 04 February 2022 22:43
To: candice.darcybryant@alteryx.com
Cc: Sundaramoorthy, Nishanth-XT <nishanth.sundaramoorthy@ubs.com>; clientsvcs@alteryx.com; Bignell, Nicholas <nicholas.bignell@ubs.com>; chiggins@alteryx.com; Jaganathan, Prasanth-Ram <prasanth-ram.jaganathan@ubs.com>
Subject: [External] Case #00528349 - Fw: Azure Information Protection (AIP) or Microsoft Information Protection (MIP) [ ref:_00DE0JJZ4._5002R1On7Ru:ref ]

Hi Candice,

Thanks for reaching out. At this juncture, formal validation of data sources with AIP or MIP applied has not been conducted. Coincidentally, earlier this week, another user submitted an inquiry pertaining to Sensitivity Labels of MIP. They had observed that files with their organization's "Confidential" label applied were unable to be input within workflows.

Similar to password protected or encrypted files, Sensitivity Labels (and other AIP/MIP implementations) may be configured in a manner that prevents drivers (e.g. Excel) of Designer from reading the file. For any incompatibility that's observed within data sources with AIP or MIP applied, it's recommend to submit an Idea as to the Designer application supporting the scope of these implementations. Our Product and Engineering Teams actively monitor Ideas to help ensure we're delivering the best product experience to our users.

Thanks for writing in.

Best,

–Josh
Sr. Customer Support Engineer | Alteryx
 

You may be selected to participate in a short feedback survey. Any comments regarding your experience will help to ensure we're delivering the best support. Thanks!

--------------- Original Message ---------------
From: Candice D'Arcy-Bryant [candice.darcybryant@alteryx.com]
Sent: 2/4/2022 1:59 AM
To: clientsvcs@alteryx.com
Cc: nishanth.sundaramoorthy@ubs.com; nicholas.bignell@ubs.com; chiggins@alteryx.com; prasanth-ram.jaganathan@ubs.com
Subject: Fw: Azure Information Protection (AIP) or Microsoft Information Protection (MIP)

Hi Support,

Please could you provide the options we have for files protected with either Azure Information Protection (AIP) or Microsoft Information Protection (MIP) to be used as inputs to Alteryx?

Please let us know if you require additional information.

Many thanks,

Candice D’Arcy-Bryant  

Strategic Customer Success Manager | +44 (0) 7872 959 067 

ca?ndice.darcybryant@alteryx.com | alteryx.com

Upcoming Out of Office:

February 07-11, 21-25

*******************************************************************************************************************

Alteryx UK Ltd is a company registered in England and Wales with company number 08806138.  Its registered office is located at 5 New Street Square, London EC4A3TW.  

This email and any files transmitted are for the sole use of the intended recipient(s) and may contain confidential and privileged information.  Any unauthorized use or disclosure is prohibited.  If you have received this email in error and are not an intended recipient, please contact the sender and remove it from your system.

*******************************************************************************************************************

From: Bignell, Nicholas <nicholas.bignell@ubs.com>
Sent: 03 February 2022 10:15
To: Candice D'Arcy-Bryant <candice.darcybryant@alteryx.com>
Cc: Sundaramoorthy, Nishanth-XT <nishanth.sundaramoorthy@ubs.com>; Jaganathan, Prasanth-Ram <prasanth-ram.jaganathan@ubs.com>; Craig Higgins <chiggins@alteryx.com>
Subject: RE: Azure Information Protection (AIP) or Microsoft Information Protection (MIP)

Hi Candice.

Seems there is an internal programme to implement this.

I have been contacted by three teams so far in the IB,  IB FX trading and IB Operations and IB Risk management.

In terms of potential impact it could be bank wide, but seems to be starting with the IB since November last year.

The program site (called DRM internally) states:

The Digital Rights Management (DRM) solution helps us manage data more effectively by putting a 'digital lock' on highly sensitive files. This means that even when a file is lost by accident, the external person who finds it cannot access its contents. These DRM classified and protected files can still be accessed and edited internally by UBS employees.

After a file has been classified according to its level of sensitivity DRM will automatically encrypt files if they are classified as 'confidential' or 'strictly confidential'. The classification and protection of a file can be set manually, or is automatically set for downloads of reports from applications that contain sensitive information or for users that have access to CID from specific applications (see details in the DRM guideline).

DRM is available globally in UBS.

Thanks Nick

From: Candice D'Arcy-Bryant <candice.darcybryant@alteryx.com>
Sent: 03 February 2022 09:32
To: Bignell, Nicholas <nicholas.bignell@ubs.com>
Cc: Sundaramoorthy, Nishanth-XT <nishanth.sundaramoorthy@ubs.com>; Jaganathan, Prasanth-Ram <prasanth-ram.jaganathan@ubs.com>; Craig Higgins <chiggins@alteryx.com>
Subject: [External] Re: Azure Information Protection (AIP) or Microsoft Information Protection (MIP)

Hi Nick,

Yes, I'm enquiring internally and will get back to you as soon as I have some information.

In the meantime, it would be good to understand:

• Who is impacted by this issue?
• What the impact is?
• Where in the business this is being felt the most?
• How many users / workflows are affected by this?
• When did this first start to affect users / workflows?

Many thanks,

Candice D’Arcy-Bryant  

Strategic Customer Success Manager | +44 (0) 7872 959 067 

ca?ndice.darcybryant@alteryx.com | alteryx.com

Upcoming Out of Office:

February 07-11, 21-25

*******************************************************************************************************************

Alteryx UK Ltd is a company registered in England and Wales with company number 08806138.  Its registered office is located at 5 New Street Square, London EC4A3TW.  

This email and any files transmitted are for the sole use of the intended recipient(s) and may contain confidential and privileged information.  Any unauthorized use or disclosure is prohibited.  If you have received this email in error and are not an intended recipient, please contact the sender and remove it from your system.

*******************************************************************************************************************

From: Bignell, Nicholas <nicholas.bignell@ubs.com>
Sent: 03 February 2022 08:48
To: Candice D'Arcy-Bryant <candice.darcybryant@alteryx.com>
Cc: Sundaramoorthy, Nishanth-XT <nishanth.sundaramoorthy@ubs.com>; Jaganathan, Prasanth-Ram <prasanth-ram.jaganathan@ubs.com>
Subject: Azure Information Protection (AIP) or Microsoft Information Protection (MIP)

Hi Candice

Can you investigate what options we have for users that want use files as inputs to Alteryx that have been protected with either Azure Information Protection (AIP) or Microsoft Information Protection (MIP)

Thanks Nick

ref:_00DE0JJZ4._5002R1On7Ru:ref

The Edit menu allows you to see what your next undo/redo actions are. This is super helpful, however sometimes I decide to scrap an idea I was starting on and need to perform multiple undo's in a row. It would be great if we could see a list of actions like in the debug undo/redo stack menu then select how many steps we'd like to undo/redo.

For example, using the below actions, if I want to undo the Change Summarize Properties and also the Modify Summarize, currently I have to do that in two steps. I'd like to be able to click the Modify Summarize and have the workflow undo all commands up to and including that one.

Hello all,

As of today, you can use the Dynamic Select Field with two options

-by types (you can dynamically select all, all date, etc..)
-by formula

I suggest 2 easy improvements

-from a list field. You connect a field list to a second entry with a "Field name" field
-from flow : You connect a flow to a second entry and the common fields are selected

Best regards,

Simon

Hello all,

MonetDB is a very light, fast, open-source database available here :
https://www.monetdb.org/

Really enjoy it, works pretty well with Tableau and it's a good introduction to column-store concepts and analytics with SQL.

It has also gained a lot of popularity these last years :
https://db-engines.com/en/ranking_trend/system/MonetDB

Sadly, Alteryx does not support it yet.

Best regards

I wasn't able to find an existing idea for this, so here goes...

We often put URLs in Comment boxes in order to direct workflow users to different resources, but users are then required to go into the Comment and copy the string (and then paste in their browser). It would be quite handy if the Comment tool simply turned text strings with a url format into clickable links (as seen in Word, Slack, etc).

It would be even more handy if it also had basic text formatting tools (bold, italic, underline, coloring, highlighting of specified characters/words) -- or if it could just render html (like this text tool I'm typing into right now) 😎

Here's a sample of what you get if no records are read into a python tool:

Error: CReW SHA256 (4): Tool #1: Traceback (most recent call last):
  File "D:\Engine_10804_3513901e8d4d4ab48a13c314a18fd1f9_\2f1b1eb4701e445775092128efe77f76\workbook.py", line 7, in <module>
    df = Alteryx.read('#1')
  File "C:\Program Files\Alteryx\bin\Miniconda3\envs\DesignerBaseTools_venv\lib\site-packages\ayx\export.py", line 35, in read
    return _CachedData_(debug=debug).read(incoming_connection_name, **kwargs)
  File "C:\Program Files\Alteryx\bin\Miniconda3\envs\DesignerBaseTools_venv\lib\site-packages\ayx\CachedData.py", line 306, in read
    data = db.getData()
  File "C:\Program Files\Alteryx\bin\Miniconda3\envs\DesignerBaseTools_venv\lib\site-packages\ayx\Datafiles.py", line 500, in getData
    data = self.connection.read_nparrays()
RuntimeError: DataWrap2WrigleyDb::GoRecord: Attempt to seek past the end of the file

I've fixed this in my macro by forcing a DUMMY record into the python tool (deleting it on the back-end).  It would be much nicer to have error handling that prevents the issue.  Even as a configuration option, what to do with no input this would simplify things.  

This error condition potentially effects every python tool created.

Cheers,

Mark

Hello,

I think the option Overwrite File (Remove) shouldn't throw an error if the file is not present

Or, I don't know, make 2 options : one with fail if file is missing, the other to not fail.

This idea is the same than https://community.alteryx.com/t5/Alteryx-Designer-Ideas/Overwrite-Table-for-output-write-indb-should... but for files.

Best regards,

Simon