Be sure to review our Idea Submission Guidelines for more information!
Submission GuidelinesHello,
After used the new "Image Recognition Tool" a few days, I think you could improve it :
> by adding the dimensional constraints in front of each of the pre-trained models,
> by adding a true tool to divide the training data correctly (in order to have an equivalent number of images for each of the labels)
> at least, allow the tool to use black & white images (I wanted to test it on the MNIST, but the tool tells me that it necessarily needs RGB images) ?
Question : do you in the future allow the user to choose between CPU or GPU usage ?
In any case, thank you again for this new tool, it is certainly perfectible, but very simple to use, and I sincerely think that it will allow a greater number of people to understand the many use cases made possible thanks to image recognition.
Thank you again
Kévin VANCAPPEL (France ;-))
Thank you again.
Kévin VANCAPPEL
As part of our documentation process, we'd like to save the documented image of the Alteryx workflow to a OneNote project folder. However, the image quality of the Print->Send to OneNote option is too low to capture many of our processes.
It would really help the project documentation process if we could increase the image resolution of the output image so that the workflow can be zoomed in to and seen clearly. I think this could be achieved by either enabling larger paper sizes in the Page Setup, or by giving the ability to increase the DPI of the outputted image.
I would love to see Alteryx add an indicator whenever a number being displayed is being truncated. For example, this picture is currently confusing:
The displayed numbers should all be equal according to their displayed value, but in reality a different number is being stored in the background. I would propose something like this:
1) Any number that is being truncated when displayed would have that red triangle in the upper right corner. This already happens when a formula tool result is truncated, but I would like for it to be displayed on all data.
2) Clicking on the cell would show the actual value, not the truncated value. This would be great when debugging.
I understand that numbers are more complex than meets the eye, and I think that changes like this would help alleviate some of the mystery (like why 2 of my numbers above aren't equal).
Hi ,
Price Elasiticity is an important topic in Retail Business. I have browsed over the net trying to find an optimal methodology to calculate Elasticity mainly in a retail Setting, where we have Point of Sale, Transactional data.
Can we develop a tool for the same?
Currently, when choosing the "<List Of Sheet Names>" options for excel files, Alteryx always does an implicit sort of the sheets when outputting the list. For some of my excel files I need to read, the order of the sheets in the excel is important. But Alteryx will always perform a sort, without me being able to know what the original order was. And yes, one of those fun situations where I don't control the excel sheet.
It would be nice when selecting this option to either preserve the order of the sheets or somehow include an additional column that numbers the order the sheet was in.
It would be nice to have the option to overlay multiple addresses to find marketing opportunities within the heatmap. Currently I have to map the addresses elsewhere and click back and forth between tabs to see where they lay within the chosen variables.
When running Alteryx using parallels we were unable to start a CSV file on a specific line (greater than 1).
Message: Attempted to skip more lines than in file. Please check the import line.
The filename includes a UNC path. We attempted to modify the workflow dependency to be relative (all options were tried). Alteryx could not/did not change the path as when using parallels the directory is always UNC.
This problem was posted in the discussions and I'm entering it here in ideas for remediation.
Cheers,
Mark
One of the tools that I use the most is the SELECT tool because I normally get large data sets with fields that I won't be using for a specific analysis or with fields that need re-naming. In the same way, sometimes Alteryx will mark a field in a different type than the one I need (e.g. date field as string). That's when the SELECT comes in handy.
However, often times when dealing with multiple sources and having many SELECT tools on your canvas can make the workflow look a little "crowded". Not to mention adding extra tools that will need later explanation when presenting/sharing your canvas with others. That is why my suggestion is to give the CONNECTION tool "more power" by offering some of the functionality found in the SELECT tool.
For instance, if one of the most used features of the SELECT tool is to choose the fields that will move through the workflow, then may be we can make that feature available in the CONNECTION tool. Similarly, if one of the most used features (by Alteryx users) is to re-name fields or change the field type, then may be we can make that available in the CONNECTION tool as well.
At the end, developers can benefit from speeding up workflow development processes and end-users will benefit by having cleaner workflows presented to them, which always help to get the message across.
What do you guys think? Any of you feel the same? Leave your comments below.
It would be great if we could have a Windows Active Directory data connector tool added to the standard Alteryx toolset.
MS Excel Power Query and PowerBI both can connect to Active Directory for use as a data source, but are both very cumbersome to use. Having a connector in Alteryx that can read AD data into a workflow would be super helpful for a long list of use cases. A couple that are top of mind for me are:
-Leveraging group membership info for dynamic distribution of reports or datasets
-Being able to build reporting and dashboards about the organization (useful for Tech audit, HR, etc.)
I've seen links to an old project on GitHub of someone that started development on this, but the method (just copy these random .dlls into your program directory) is seriously frowned upon by any enterpise IT. Would be great if Alteryx could pick up that work, polish it a bit and add it to the actual Alteryx Designer toolset.
Hi!
I opened up WorkflowA and WorkflowB. Later, I went to Windows Explorer, and clicked open WorkflowA, because I wanted to make another change in it. Not realizing that it was already open, I inadvertently forked WorkflowA into two versions.
It is desireable to be able to open a workflow twice. Say, I made several changes and wanted to compare that to the original. However, it would be nice if Alteryx produced a warning saying that the workflow has already been opened. In my case, WorkflowA was pretty complicated, and I don't know if I "un-forked" the workflow correctly. A notice would have prevented this scenario, which has happened to me multiple times.
Thank you,
Joe Kelly
I was trying to download zipped text files from Amazon S3 Bucket using Amazon S3 Download Tool.
Unfortunately the tool allows you to choose between csv, dbf and yxdb files and there is no option to select Zipped Text.
It will be very useful if this feature can be provided as most of files available on S3 are large files and are generelly in Zipped format.
I love the dynamic rename tool because quite often my headers are in the first row of data in a text file (or sometimes, Excel!).
However, whenever I open a workflow, I have to run the workflow first in order to make the rest of the workflow aware of the field names that I've mapped in the dynamic rename tool, and to clear out missing fields from downstream tools. When a workflow takes a while to run, this is a cumbersome step.
Alteryx Designer should be aware of the field names downstream from the dynamic rename tool, and make them available in the workflow for use downstream as soon as they are added (or when the workflow is initially opened without having been run first).
Hi,
I would like to see Global Variable being made available in Alteryx. I have seen the Global Constant being made available under Workflow "User" configuration. But this is constant and needs to be defined at Design time.
How about a Process Id that needs to be auto genearted and the same needs to be available across the formula tools used with in the workflow.
Hi,
I would like to have something similiar to in SSIS called as Sequence Container implemented in Alteryx. A sequence container would ensure that the process flows in a particular order. Lets say I would like to read 3 different files having different schema each and I want to read/validated it in particular order. I don't see any tool that would help me do this.
Normally I have no issue with the splash screen but I've found with analytic apps that the splash covers up the App dialogue box.
I'm aware that you can click on it to hide it but having the option to disable it (even just for apps) would be great.
The Delete and connect around in the right click menu is really nice for not having to go find the connector and re plug it in. I would ask that there is essentially the same option when cutting a tool. When the tool is cut the data path is uneffected. Also, it would be nice to be able to right click(or left click and ctrl+v) on a data path and paste the tool directly in, instead of having to paste then connect everything back up. Lastly, I often find myself pulling out the wrong tool/wanting to replace a tool with another. I think it would be nice to have the option of dropping a toll directly onto another to replace it. Again connecting drectly into the data path.
Currently with Alias Manager you can only create Aliases for database connections.
We use HDFS Connections to write files to HDFS so it would be really useful to use an Alias especially when promoting workflows to Alteryx Server.
Hi Folks
So have been using the fuzzy match function quite a bit of recently. Love the tool, however it could benefit form being able to wire in a list of 'Don't generate' keywords.
At the moment we can enter them manually, however where for example i might want to exclude city or area names etc... from the do not generate list this becomes quite a tedious manual entry task, so being able to load in keyword data from pre-existing lists etc.. would be a time saver.
Cheers
Gavin
I would like to see some functionality that would allow the user to select a specific tool(s) and run them. It looks like the workflow caches data at each tool so it should be doable to make it where i can run a specific tool from any point.
I know for me, i often run my new workflow and have forgotten a browse somewhere then have to add it and run the whole thing. Instead it would be ideal to be able to insert my browse like normal and select the tool before that browse and run just that one.
Do you guys think this would also be a useful capability?
It seems that I'm unable to use my mouse wheel to scroll through or "Control + A" to select all in the "Table or Query" field of the "Connect In-DB" tool. I have to click the top of it and drag down the text to highlight it all.